A job is the work you sold. It starts from an approved quote, gets booked on the calendar, is finished by the crew, and ends with an invoice. Each job holds the lines from the quote, the visits, the crew's notes, photos, receipts and time, and the invoice. Jobs live under Work: tap the Jobs chip to see them.
Where jobs come from
Jobs start from an approved quote. Open the quote and press Convert to job, or let Chalk do it on approval. The job copies the quote's lines, so it carries exactly what was sold. See Turn an approved quote into a job below for the steps and what is copied.
For work with no quote behind it, like a warranty touch-up, press New job on Work > Jobs (on a phone, + New), or + Create, then Job. Pick the customer and the address, name the job if you like, and press Make the job. Then add the charges and book the visits on the job. Owners, admins and office staff can make one. For a quick visit that is not part of a job, book a one-off visit on the calendar instead.
Turn an approved quote into a job
Once a quote is approved, its main button reads Convert to job. Press it and the job opens, carrying the sold lines, ready to book. To skip the press, turn on Turn approved quotes into jobs automatically under Settings > Quotes and invoices. You need the Customers and quotes permission to convert.
Convert by hand
- Open the quote. It must be approved: the customer approved it on their page, or you pressed Mark approved after they said yes. See Quote approval and signatures.
- Press Convert to job. Chalk says "Job created" and opens the job.
- On the job, the main button now reads Schedule a visit. Press it to give the work a day, or drag it from the calendar's Waiting list. See Book, move and confirm visits.
Back on the quote, the main button now reads Open job # with the job's number.
Let Chalk convert on approval
- Go to Settings > Quotes and invoices (owner and admin).
- In Quoting rules, turn on Turn approved quotes into jobs automatically. It is off until you turn it on.
From then on, each approval becomes a job by itself and waits in Waiting to be scheduled on the calendar. The bell says the customer "needs a day on the calendar". Nothing is booked for you: picking the day is still your call.
When a customer approves and chooses to pay the deposit online, the approval counts once the deposit is paid, so the job appears then. See Take a deposit.
What the job copies
- The quote's title, customer and address.
- The sold lines with their measurements. Optional extras the customer did not pick stay off the job.
- The discount, and the total before sales tax (tax goes on the invoice).
- Any crew pay and costs set on the lines, and the salesperson.
- The quote's own photos and files, so the crew can see them. The work showcase stays on the quote.
- Notes for the crew from the lead and the address, such as a gate code. Your message to the customer on the quote is not copied, since it was written to them.
- One visit with no time yet, waiting on the calendar's Waiting list.
- The link to the customer's lead, which moves to won on the Funnel.
A deposit paid on the quote stays with the quote and is taken off the job's first invoice.
Good to know about converting
- A converted quote is sealed. Change the work and the price on the job from then on. The job's Notes card lets the office edit the crew's notes.
- One job per quote. Pressing Convert twice, or converting after Chalk already did, never makes a second job.
- Chalk does not text or email the customer when a quote becomes a job.
- Shops that only bill: with "We just bill people" set (see the note above), the button reads Convert to invoice instead and there are no jobs.
Job statuses
The status changes on its own as the work moves along. You never set it by hand.
| Status | What it means |
|---|---|
| Unscheduled | No visit with a time yet. Every new job starts here. |
| Upcoming | The next visit is on a future day. |
| Today | The next visit is today, in your shop's time zone. |
| Late | The next open visit's time has passed and nobody marked it done. |
| Needs invoicing | All the work is done and there is still money to bill. |
| Completed | The work is done and the job is invoiced in full. |
| On hold | Paused. Press Reopen job to put it back on the calendar. |
Finishing the last open visit moves the job to Needs invoicing by itself. A job that was already invoiced in full goes straight to Completed. Billing the last dollar on a job with no work left ahead also closes it as Completed.
Book the work and the crew
Open the job. The main button follows the job's next step:
- Schedule a visit when nothing is booked. Pick the day and time, choose who is going under Who's going?, and use Repeats for work that comes back.
- Mark job complete once a visit is booked.
- Generate invoice for (the amount left to bill) once the work is done.
- Open invoice # once it is billed in full.
Two other cases: a finished job with no price on it shows Add charges to invoice, and a job On hold shows Reopen job. The rest, such as Bill part now for a mid-job invoice, sits in the job's More menu. See Jobs that take more than one day.
To change the time or the people on a visit, use Edit the time or crew on that visit. If the time double-books somebody, Chalk says who and offers Book it anyway. Moving visits and assigning people needs the Book and move visits permission.
Checklists
A checklist is what the crew ticks off before a visit counts as done: "Edges checked", "Drips cleaned up", "After photos taken". Make them under Settings > Lists > Checklists with New checklist.
Each item is a Checkbox, a Note or a Photo, and you choose if it is Required. Checkboxes start as required; notes and photos start as optional. Then pick where the list goes under Added to visits:
- Default for jobs goes on every job visit.
- Default for quote appointments goes on estimate visits.
- Manual only never goes on by itself. Someone adds it from the finish sheet with Add a checklist.
You can also set a Checklist on a job type under Settings > Lists > Job types. That list goes on every visit for that kind of work, including visits already on the calendar.
When someone presses Finish this visit, they see the checklist, a Note for the office, and After photos. Mark it done stays grey until every required item is done: each required box ticked, required note written and required photo added.
Notes on a job
The Notes card shows what the crew should know. It fills in when the quote becomes a job, from the lead and the address. For the crew is your shop's notes. They asked for is what the customer wrote on their request.
To change the crew notes:
- On the job's Notes card, press Edit (or Add notes for the crew when there are none yet).
- Type in For the crew: gate codes, the dog, where to park.
- Press Save notes.
The crew sees these on the job and on their Today screen. They asked for stays exactly as the customer wrote it. The owner can always edit the notes, and so can any role with Customers and quotes on, except field crew and bookkeepers.
For a running log, use Add a note or Log a call on the Activity card at the bottom of the job.
Close out the job
Press Mark job complete. Chalk shows what is ready to bill and how many open visits it will tick off, including any on future dates. Then pick:
- Complete & generate invoice marks every visit done and opens a draft invoice for what is left to bill.
- Complete only closes the job and leaves the invoice for later.
When a job first becomes ready to bill, Chalk sends an alert to remind you to invoice it. Owners, admins, and the Office and Staff roles get it unless they turn it off; field crew only if they opt in. Change the default under Settings > Notifications.
Finished it by mistake? Open the job, then More > Reopen job. The visits that were closed by finishing it open up again.
What the crew sees
People on the Field crew role see only the jobs they are booked on. Their list shows what is coming up first, then a folded Done list. They never see prices: the job page shows a What to do card with each line and its measurements instead of the charges. They can finish their own visits, add photos and log receipts with Add a receipt, but they cannot move visits, invoice or reopen a job.
The office sees every job, the money on it and the profit card. A History card at the bottom lists what happened to the job and who did it: see Office History. Invoicing a job needs Invoices set to Full under Settings > Team.
On a phone
The Jobs list drops the one-tap Invoice and Reopen buttons from each row, so a scroll cannot change a job by accident. Open the job to do those. The count tiles at the top and the CSV download only show on a computer. On the job page, expenses, time, pay and photos start folded; tap a section to open it.
Good to know
- Required checklist items are checked on the crew's finish sheet only. Mark job complete, ChalkBot and the API can close visits without them.
- A converted quote is sealed. Change the work and price on the job, not the quote.
- Jobs over several days get one visit per day. See Jobs that take more than one day.
- Who can do what: booking and moving visits needs Book and move visits, invoicing needs Invoices on Full, and editing crew notes needs Customers and quotes. See Roles and permissions.