A fence looks like an easy quote: a long, flat surface and a sprayer. Then you add up the sides, the gates, the posts, the washing, the masking and the overspray, and the easy quote turns into a day of work you priced at four hours.
This guide shows how to price fence staining so the number holds up. You will measure both sides, work out stain from the data sheets, build hours from rates you time yourself, and finish with a price that includes overhead and profit. A fence is a different job from a deck: it is priced by the linear foot, it has two sides and a lot of edges, and it lasts longer between coats. If you are quoting a deck, use How to price a deck stain job instead.
What homeowners see online
Fixr's fence painting and staining guide (updated January 2025) is typical of what customers read. Its numbers:
| What | Fixr's range |
|---|---|
| Per square foot, paint or stain | $0.35 to $0.90 |
| Labor / materials, per sq ft | $0.30 to $0.70 / $0.05 to $0.20 |
| Per linear foot, one side / both sides | $2.25 to $10 / $4.50 to $20 |
| A 150 ft fence, both sides | $675 to $3,000 |
| Staining by fence type, per linear foot | split rail $2.25 to $3.50, picket $2.75 to $4, lattice $4 to $7, privacy $4 to $12 |
| Staining by height, per linear foot | 6 ft: $3.25 to $5.75, 8 ft: $4.50 to $7.50 |
| Pressure washing a fence | $125 to $235 |
| Stain per gallon | oil-based $30 to $100, water-based $20 to $80 |
Read the fine print on any guide like this. Fixr's page mixes "per linear foot" figures with "both sides" figures, so check which one you are comparing. These are averages and a reality check. Your own costs set your price.
Step 1: Measure both sides
- Length. Walk the fence line and measure the linear feet of each run. Gates and any gaps are separate.
- Height. Measure at a few spots. Stepped or raked fences have a different height on each panel. Note where it is under 6 ft or over.
- Sides. Count the faces you will actually stain. A fence between two properties may only be yours to stain on one side. Write down the sides you are quoting.
- Area. Length x height x sides, in square feet. A 150 ft, 6 ft fence stained on both sides is 150 x 6 x 2 = 1,800 sq ft.
- Count the extras: gates, posts and caps, a top rail or cap board, lattice panels, a section against a house.
A flat privacy fence is easy to measure. Picket, shadowbox and board-on-board fences have gaps, overlaps and edges, so the sprayer and brush hit more surface than length times height suggests. Do not guess a multiplier. Stain a test panel, time it, and use that rate for that style.
Pickets, posts, rails and gates
Length times height times sides is the stain area. It is not the work. A fence is boards, posts, rails, caps and gates, and each one takes the brush a different way.
Pickets. Here is the geometry for one common style, using example dimensions, so measure your own. Example: a 4 ft picket fence with 1x4 pickets (3.5 inches wide, 0.75 inch thick) and 2.5 inch gaps, on two 2x4 rails, with 4x4 posts every 8 feet.
| Part, per foot of fence | Math | Sq ft |
|---|---|---|
| Picket faces, one side | 2 pickets x 3.5 in x 48 in | 2.33 |
| Picket faces, other side | the same | 2.33 |
| Picket edges | 2 pickets x 2 edges x 0.75 in x 48 in | 1.00 |
| Rails, back face and edges | 2 rails x (3.5 in + 2 x 1.5 in) x 12 in | 1.08 |
| Posts, 4 faces, 4 ft showing, one every 8 ft | 4 x 3.5 in x 48 in / 8 | 0.58 |
| Total, both sides | 7.33 |
Length times height times two sides says 8 sq ft per foot. So for stain, the simple formula is close, within about 10%. For time it is not. The sprayer fogs through every gap, which is why Fixr says a sprayer uses about 33% more paint than a roller, and every picket has two edges to catch with the brush. On a picket fence, keep the area formula, raise the waste allowance, and use a slower rate than you would on a solid privacy fence. Fixr's own ranges reflect it: picket fences run $2.75 to $4 a foot against $2.25 to $3.50 for split rail.
Posts. Count them: run length divided by the post spacing, plus one at each end and at each gate. A 150 ft run with posts every 8 feet has 19 sections and 20 posts. Post caps are brush work. Price them each, or add a set allowance per post.
Rails. On a privacy fence the rails show on one side only. On split rail and post and rail, Fixr notes the rails are coated on all sides, so measure them as round or square lumber, not as a flat panel.
Gates. A gate is two faces, a frame and hardware to mask. Price each gate as its own line, with its own minimum.
Step 2: Decide how much prep it needs
| Condition | Prep |
|---|---|
| New pressure-treated or cedar | Let it dry first. DEFY's data sheet says to weather new wood three to six months; the General Services Administration's stain procedure says not to apply above 12% wood moisture. |
| Gray or mildewed, no old coating | Wash, rinse, brighten, dry |
| Old stain that is wearing out | Wash and test: if water soaks in, it will take stain |
| Old stain or paint that is peeling | Strip or scrape and sand, then wash. Price this separately. |
| Plants, vines, soil against the boards | Cut back, clear a gap, protect what you keep |
Sources: DEFY Extreme data sheet, GSA procedure. If you add pressure washing, see the pressure washing pricing guide.
Step 3: Work out stain
Rough fence boards soak up stain. The numbers from the makers and one government procedure:
| Source | Coverage per gallon | Coats |
|---|---|---|
| Sherwin-Williams SuperDeck oil-based semi-solid | 150 to 400 sq ft, depending on porosity and texture | One. A second only wet on wet. |
| Ready Seal technical data sheet | 125 sq ft on a cedar fence, 150 on a pine, spruce or treated pine fence, rated for new wood | One generous coat or two light coats. "Older wood is more porous and requires more stain." |
| Cabot Australian Timber Oil | 250 to 600 sq ft | One coat only |
| DEFY Extreme | 100 to 150 sq ft with two coats | One to two |
| GSA, semi-transparent oil | 200 to 400 smooth, 100 to 200 rough or weathered | Two on rough |
Ready Seal is one of the few makers that lists coverage for fences on their own, and its fence figures are lower than its deck figures for the same cedar (125 against 150), because rough fence boards drink more. The same sheet gives its stain a life of 2 to 5 years on vertical surfaces and 1 to 3 on horizontal ones. That is why a fence is often restained on a longer cycle than the deck next to it.
So gallons = area / coverage, plus about 10% for waste. Use the low end of the range on rough or old boards. When you spray, expect more material use: Fixr notes that a sprayer uses about 33% more paint than a roller. Sherwin-Williams also says to back-brush or back-roll sprayed stain so it works into the wood.
Step 4: Production rates
No stain maker or trade group publishes a free rate table for fences. The nearest published numbers are for house siding, from one estimating guide (CompositePaint), per painter-hour per coat:
| Task | Rate |
|---|---|
| Exterior, brush and roll | 100 to 150 sq ft |
| Exterior, spray plus back-brush | 300 to 500 sq ft |
| Pressure wash siding | 800 to 1,200 sq ft |
Treat those as a starting point. A fence has more edges, posts and gates than siding. Many crews spray with one person and back-brush with a second. Contractors in a forum thread say that on small jobs spraying saves little once masking and setup are counted.
Time your own jobs for five fences, with these columns: setup and masking, washing, staining by the square foot, gates and posts, cleanup. Use your slower average when you quote.
Step 5: From cost to price
Labor cost per hour is the wage plus payroll tax, workers' compensation and the rest. One estimating guide puts that at 25% to 40% on top of wages; the BLS median for painters was $23.75 an hour in May 2025. Add labor, materials and job costs to get direct cost, then:
Price = direct cost / (1 - overhead % - profit %)
The full explanation, with a markup vs margin table, is in How to price a deck stain job.
Example: a cedar privacy fence, priced by hand
The job (Example): 150 ft of 6 ft cedar privacy fence, both sides, with one gate. The fence is gray with no old coating. Oil-based semi-transparent stain, sprayed and back-brushed.
Placeholders: labor costs $32.50 an hour (a $25 wage plus 30% burden), overhead is 20% of price, profit is 15%.
Area: 150 x 6 x 2 = 1,800 sq ft.
| Task | Rate | Hours |
|---|---|---|
| Setup, mask the house, posts and plants | 1 job | 1.5 |
| Wash and brighten | 1,800 sq ft at 900 sq ft/hr | 2.0 |
| Spray and back-brush, one coat | 1,800 sq ft at 300 sq ft/hr | 6.0 |
| Gate, post caps, edges | 1 job | 1.0 |
| Cleanup | 1 job | 0.5 |
| Total | 11.0 |
Stain: at 250 sq ft per gallon, 1,800 sq ft is 7.2 gallons, so 8 gallons with waste.
| Item | Amount |
|---|---|
| Stain, 8 gal at $45 | $360 |
| Cleaner and brightener | $30 |
| Masking and supplies | $40 |
| Labor, 11 h x $32.50 | $357.50 |
| Direct cost | $787.50 |
| Price = $787.50 / 0.65 | $1,212 |
| Overhead share (20%) | $242 |
| Profit share (15%) | $182 |
That is $8.08 per linear foot (both sides) or $0.67 per square foot. Both land inside Fixr's ranges ($4 to $12 per linear foot for a privacy fence, $0.35 to $0.90 per square foot). If your number lands far outside, check your hours and coverage before you send it.
Turn it into lines: Fence stain, both sides, 150 lin ft at $8.10 = $1,215. Many shops price height tiers (a 4 ft, 6 ft and 8 ft rate per foot) and add a minimum charge. If you use the deck and fence stain price calculator, put your own hours and rates in rather than leaving the defaults.
Example: a fence in the calculator, both sides and one side
Here is a different fence run through the deck and fence stain price calculator, with every box shown. This one is pressure-treated pine, so it uses Ready Seal's 150 sq ft a gallon for a treated pine fence instead of the 250 used above. The three prices are three grades of one-coat stain.
Inputs (Example):
| Box | Value |
|---|---|
| Deck floor area, railing, stair steps | 0, 0, 0 |
| Fence length / height / sides | 150 ft / 6 ft / Both sides |
| Coverage per gallon, per coat | 150 sq ft |
| Waste and overspray | 10% |
| Other materials for the job | $70 (cleaner, brightener, masking film, tape) |
| Wash prep | 900 sq ft/hr |
| Stain fence, per coat | 300 sq ft/hr (spray and back-brush, the low end of CompositePaint's siding range) |
| Setup, travel and cleanup | 3 hours (masking, one gate, 20 post caps, cleanup) |
| Labor cost per crew hour | $32.50 |
| Overhead / target profit margin | 20% / 15% |
| Good / Better / Best | Wash only, 1 coat, at $35 / $50 / $65 a gallon |
What it shows, both sides (stain area 150 x 6 x 2 = 1,800 sq ft):
| Good | Better | Best | |
|---|---|---|---|
| Price | $1,411.55 | $1,734.62 | $2,057.70 |
| Per linear foot | $9.41 | $11.56 | $13.72 |
| Gallons to buy | 14 (needs 13.2) | 14 (needs 13.2) | 14 (needs 13.2) |
| Labor hours | 11 | 11 | 11 |
| Materials | $560.00 | $770.00 | $980.00 |
| Labor | $357.50 | $357.50 | $357.50 |
| Overhead | $282.31 | $346.92 | $411.54 |
| Job cost | $1,199.81 | $1,474.42 | $1,749.04 |
| Profit | $211.74 | $260.20 | $308.66 |
How the hours add up: wash 1,800 / 900 = 2 hours, stain 1,800 / 300 = 6 hours, plus 3 hours of setup, is 11 hours, or $357.50 of labor. Better's materials are 14 gallons x $50 + $70 = $770. The price is ($357.50 + $770) / 0.65 = $1,734.62.
The same fence, one side only (900 sq ft): 7 gallons (needs 6.6), 7 hours, and prices of $834.62, $996.16 and $1,157.70. One side is about 43% less than both sides, not half, because the 3 hours of setup, travel and cleanup do not shrink. Quote both and let the customer choose, and write on the quote which side you are staining.
By height, Better grade, 150 ft, both sides, same inputs:
| Height | Stain area | Hours | Price | Per linear foot | Per sq ft |
|---|---|---|---|---|---|
| 4 ft | 1,200 sq ft | 8.3 | $1,215.00 | $8.10 | $1.01 |
| 6 ft | 1,800 sq ft | 11 | $1,734.62 | $11.56 | $0.96 |
| 8 ft | 2,400 sq ft | 13.7 | $2,177.31 | $14.52 | $0.91 |
All three sit inside Fixr's $4.50 to $20 per linear foot for both sides, but above its $0.35 to $0.90 per square foot. The reason is material. At 150 sq ft a gallon, stain is more than half of the direct cost here (62% for Better), against about a third in the deck guide's examples. On a rough fence, the coverage you choose moves the price more than any production rate does, so read the data sheet before you quote. The taller the fence, the less each foot pays toward setup, which is why the price per square foot falls as the fence gets taller.
Per linear foot vs per square foot
Customers talk in feet of fence. Stain labels talk in square feet. Convert, and always say which sides you are pricing.
Square feet per linear foot = height x sides
| Fence height | One side | Both sides | Fixr's $0.35 to $0.90 per sq ft, one side | Fixr's range, both sides | The worked example's $0.67 per sq ft, both sides |
|---|---|---|---|---|---|
| 4 ft | 4 sq ft | 8 sq ft | $1.40 to $3.60 per ft | $2.80 to $7.20 per ft | $5.36 per ft |
| 5 ft | 5 sq ft | 10 sq ft | $1.75 to $4.50 per ft | $3.50 to $9.00 per ft | $6.70 per ft |
| 6 ft | 6 sq ft | 12 sq ft | $2.10 to $5.40 per ft | $4.20 to $10.80 per ft | $8.04 per ft |
| 8 ft | 8 sq ft | 16 sq ft | $2.80 to $7.20 per ft | $5.60 to $14.40 per ft | $10.72 per ft |
Fixr's own per-linear-foot figures ($4 to $12 for a privacy fence, $3.25 to $5.75 for a 6 ft fence) do not line up neatly with its per-square-foot range, which is the point made earlier: check which unit and which sides a number means before you compare it with yours. The last column takes the worked example's cost-based $0.67 per sq ft and multiplies it out for each height.
A privacy fence
A solid privacy fence is the easiest fence to quote, and the one with the most hidden time. Treat it like this:
- Measure the run and the height, and write both sides on the quote. A privacy fence usually has a "good side" and a "rail side." Some customers want only one.
- Count the cap, the top rail and the posts. A cap board and trim take a brush. The sprayer will not do them well.
- Count the gates. A gate is two faces, a frame and hardware. Treat it as a small job.
- Board-on-board and shadowbox have overlaps and gaps. The sprayer hits more surface than length times height suggests. Time a test panel.
- Wet the plants, cover the siding next to it and ask about the neighbor's side. Overspray onto a neighbor's property is your problem.
- Soak and drip. Rough cedar and pressure-treated pine soak up stain. Use the low end of the coverage range, and watch for runs at the bottom of boards where stain pools.
The worked example above is a 150 ft, 6 ft privacy fence stained both sides: $8.08 per linear foot, $0.67 per square foot. If your fence is shorter, the setup and cleanup are a bigger share of the price per foot, so set a minimum and do not scale the per-foot rate down.
Painting a fence instead of staining it
Some customers want paint, usually for a solid color that hides the wood. It is a different job. Paint forms a film on top and needs a clean, sound surface, usually a primer on bare wood and two coats. It takes more material and more time than a stain that soaks in. Here is the same fence from the worked example, painted.
Sherwin-Williams' Duration data sheet is for house siding, not fences, but it shows the kind of numbers to expect. It lists 250 to 300 sq ft per gallon, one coat on a repaint, two coats on bare surfaces, and a 4-hour wait between coats at 45 F or warmer. Use the data sheet for the product you will actually use.
The job: 150 ft of 6 ft cedar privacy fence, both sides (1,800 sq ft), bare gray wood, a self-priming exterior acrylic, two coats, sprayed and back-brushed, one gate.
Placeholders: labor $32.50 an hour, overhead 20%, profit 15%, paint at $55 a gallon. Coverage 275 sq ft per gallon per coat. The spray rate is 300 sq ft per hour per coat, the same as the stain example.
| Task | Rate | Hours |
|---|---|---|
| Setup, mask the house, posts and plants | 1 job | 1.5 |
| Wash and brighten | 1,800 sq ft at 900 sq ft/hr | 2.0 |
| Spray and back-brush, two coats | 3,600 sq ft of coats at 300 sq ft/hr | 12.0 |
| Gate, post caps, edges | 1 job | 1.5 |
| Cleanup | 1 job | 0.5 |
| Total | 17.5 |
Paint: 1,800 x 2 / 275 = 13.1 gallons, 14.4 with 10% waste, so 15 gallons.
| Item | Stain (worked example) | Paint |
|---|---|---|
| Labor | $357.50 (11.0 h) | $568.75 (17.5 h) |
| Stain or paint | $360 (8 gal at $45) | $825 (15 gal at $55) |
| Cleaner, masking and supplies | $70 | $70 |
| Direct cost | $787.50 | $1,463.75 |
| Price at 0.65 | $1,212 | $2,252 |
| Per linear foot | $8.08 | $15.01 |
| Per square foot | $0.67 | $1.25 |
So painting this fence costs about 86% more than staining it, mostly because of the second coat and the extra material. Fixr's $0.35 to $0.90 per square foot is for painting and staining combined, and $1.25 is above it. If a customer wants paint, quote the paint and say why it costs more. Do not stain-price a paint job.
Paint vs stain, in terms the customer understands. A stain soaks in and wears off. A paint sits on top and, if the surface or the weather was wrong, peels. Neither is maintenance-free. Say what you will do to prepare the wood (wash, scrape loose paint, prime bare spots), how long you wait between coats, and what you will not do (repair rot, replace boards).
Metal fences. Wrought iron and aluminum are different again: rust treatment, a metal primer and a lot of small surfaces. Time a section and price by the linear foot and the height.
Common mistakes
- Pricing one side and staining two. Say on the quote which sides are included.
- Not counting gates, posts and caps. They are slow, detail work.
- Spraying without masking time. Overspray onto a house, a car or a neighbor's yard costs far more than the masking would have. If it happens anyway, When you damage a customer's property covers the first hour and the insurance call.
- Using one coverage rate for every fence. New smooth boards and gray rough boards are different jobs.
- Skipping the drying rule. Staining wet or brand new wood is a callback. See the weather rules for temperature, rain and wait-after-washing limits from the data sheets, and the expectations form for what to tell the customer.
- No minimum charge. A 30 ft run still costs a trip, a setup and a cleanup.
- Not offering the fence with the deck. A customer getting a deck stained often has a fence that needs it too. Offer it as an add-on while you are there. Add-ons and upsells customers actually thank you for has more on pricing small add-ons.
- Forgetting access. Hills, vines, locked gates and a neighbor you have to ask add time.
How Chalk helps
This part is about our software.
- Price book. Add a fence line to the price book with the unit (lin ft or sq ft) and your price per unit, then pick it on the quote. See Send a quote and get it approved, and Set up Chalk for deck and fence staining for fence items by the foot and re-stain reminders.
- Count gates and more. With Measure work several ways on one line switched on under Settings > Company (it is off until you turn it on), Chalk's Measurements tab offers starter measurements (Linear feet, Square feet, Railings, Stairs, Gates and Rooms), so one fence line can carry its footage and its gates. Price one line several ways shows how.
- Cost view. The quote has a What the job will cost card, which the customer never sees. Owners, admins and sales roles see it by default; for anyone else it follows their role's Job prices and Pay on jobs and quotes settings.
- Digital quote and invoice. Send the quote and the invoice as links the customer can open on a phone.
Want a form to fill in by hand? Use the free deck and fence staining estimate template.
FAQ
How much should I charge per linear foot to stain a fence?
Fixr's national range is $2.25 to $10 per linear foot for one side and $4.50 to $20 for both sides. Build your own number from your costs. In the calculator example on this page, a 150 foot, 6 foot fence stained on both sides comes to $9.41 to $13.72 a foot, depending on the stain.
Do you charge double to stain both sides of a fence?
No. The stain and the spraying double, but the setup, masking, travel and cleanup do not. In the calculator example on this page, one side of a 150 foot, 6 foot fence is $996.16 and both sides are $1,734.62, so one side costs about 43% less, not 50%. Always write on the quote which sides are included.
How many gallons of stain does a fence take?
Multiply length by height by the sides you are staining, then divide by the data sheet's coverage and add about 10% for waste. Ready Seal lists 125 square feet a gallon for a cedar fence and 150 for a pine or treated pine fence. A 150 foot, 6 foot fence, both sides, is 1,800 square feet, so about 13.2 gallons at 150. You buy 14.
How do I price posts, gates and a picket fence?
Price gates and post caps each, because they are slow brush work. For a picket fence, length times height times sides is still a fair stain estimate, but the time is not: every picket has two edges and a sprayer loses stain through the gaps. Fixr says a sprayer uses about 33% more paint than a roller. Time a test section and use a slower rate.
How often does a fence need to be restained?
It depends on the product and the sun. Ready Seal's data sheet gives its stain a life of 2 to 5 years on vertical surfaces like fences and 1 to 3 years on horizontal ones like deck floors, and suggests a cleaning and recoat every two years. Check the data sheet for the stain you use.
Is it cheaper to stain a fence or paint it?
Staining is usually cheaper. In this guide's example, painting the same 150 foot fence on both sides costs about 86% more than staining it, mostly because of the second coat and the extra paint. Paint also needs a sound surface and primer on bare wood.
Sources
Prices and rates change and vary by region. Check the current version of each source.
- Fixr: cost to paint or stain a fence, updated January 31, 2025.
- Sherwin-Williams SuperDeck Oil-Based Semi-Solid Wood Stain, product data sheet, March 2025.
- Cabot Australian Timber Oil product page.
- DEFY Extreme Wood Stain product data sheet, 2020.
- Ready Seal Stain and Sealer technical data sheet, for fence coverage by wood type and life on vertical and horizontal surfaces.
- U.S. General Services Administration: Applying a semi-transparent or opaque stain to wood, archived copy (the gsa.gov page no longer loads).
- CompositePaint: how to estimate a paint job. An estimating guide; siding rates used as a starting point only.
- Pressure Washing Resource: how do you apply your sealer/stain. Contractor forum posts, used as color only.
- U.S. Bureau of Labor Statistics: painters, construction and maintenance.