Getting paid

Getting paid faster: invoicing habits that work

Invoicing habits that get contractors paid faster: terms up front, same-day invoices, easy ways to pay, polite reminder scripts and late fees.

Adrian GluchowskiOwner of Superior Stain Solutions, builder of ChalkLast reviewed 7 min read

On this page

You did the work. The customer is happy. And three weeks later you're still waiting on the money. Slow pay is rarely about a bad customer. Most of the time the invoice went out late, it wasn't clear when it was due, paying was a hassle, or nobody reminded them.

Every one of those is fixable. These are the habits that get money in faster, with a worked example of what slow pay costs and scripts for the reminders.

What slow pay really costs

The money you're owed is money you've already spent: wages, materials, fuel. Until it comes in, you're lending it to your customers for free.

Say you bill $40,000 a month. That's about $1,333 a day. The amount owed to you at any moment is roughly a day's billing times the days it takes to get paid:

Average days to get paidOwed to you at any time
30 days$40,000
14 days$18,667
7 days$9,333

Going from 30 days to 7 frees up about $30,667 for good. That's payroll in a slow month, a new sprayer, or a cushion that lets you say no to a bad job.

1. Set the terms before the work starts

Payment terms belong on the estimate, not the invoice. When the customer approves, they've agreed to how they'll pay.

Spell out:

  • The deposit and when it's due. See deposits for contractors.
  • Progress payments on longer jobs, tied to finished stages.
  • When the balance is due. For homeowners, "due when the work is done" or "due on receipt" is common and fair. Long terms like net 30 make sense for businesses that pay on a schedule, but they just slow down a homeowner.
  • How they can pay.
  • What happens if it's late, if you charge a late fee.

Sample terms:

A deposit of $1,500 is due on approval. The balance is due the day the work is finished. Pay by card, bank transfer, check or cash. Balances unpaid 15 days after the due date get a one-time $25 late fee.

2. Invoice the day the job is done

The best time to send the invoice is during the final walkthrough, while the customer is standing in front of the work they love. The worst time is two weeks later, when the job is old news.

  • Same day, every time. Make it part of finishing the job, like loading the truck.
  • Send it to their phone. A text with a link gets opened sooner than a paper bill.
  • Make it match the estimate. Same line items, same total, with any changes clearly listed. Surprises slow payment.
  • Add the after photos. It reminds them what they're paying for.

3. Make paying easy

Every step between "I should pay that" and "paid" costs you days.

  • A pay link right in the invoice, not "call us with a card number."
  • Offer card and bank transfer. Bank transfers usually cost much less to take than cards. Some customers will happily pay that way if you ask.
  • Still accept checks and cash for the customers who want them.
  • For big jobs, think about financing. It can help a customer say yes, and it costs you a fee. See Should you offer financing to customers?.
  • Charge for late cancellations and lockouts in writing. See cancellation and lockout policy.
  • One tap from their phone. Most customers will open your invoice on a phone.

Card fees are real money, but so is waiting. On a $3,000 invoice, a 2.9% + 30 cent card fee is $87.30. You can absorb it, build it into your prices, or in most states pass it on with the right notice. See can contractors charge a credit card fee.

4. Remind, politely and on a schedule

Most late payers aren't refusing. They forgot. A reminder schedule takes the awkwardness out, because it's the same for everyone.

WhenMessage
Due dateFriendly reminder with the pay link
3 days late"Just checking this didn't get lost"
7 days lateClear, still friendly, with the balance
14 days lateA phone call
30 days lateA final written notice with next steps

Scripts

Due date:

Hi Dana, thanks again for having us out. Your invoice for the deck is due today: [link]. You can pay by card or bank right from that page.

3 days late:

Hi Dana, just checking that the invoice for your deck didn't get lost. Here's the link again: [link]. Thanks!

7 days late:

Hi Dana, a reminder that $2,450 is still open for the deck staining we finished on the 3rd. You can pay here: [link]. If something about the work or the bill isn't right, please tell me and I'll fix it.

That last line matters. Sometimes a customer isn't paying because something bothers them and they haven't said it.

14 days late: call. A friendly phone call gets results that a fourth text won't. Ask if everything was OK with the job, then ask when they can pay. If they need to split it up, agree on dates and put them in writing.

30 days late: a final notice.

Hi Dana, your balance of $2,450 for the deck staining is now 30 days past due. Please pay by [date] at [link]. If we can't sort this out by then, I'll have to take the next steps for collecting it. I'd much rather settle it with you directly, so please call me if there's a problem.

5. Late fees: in writing, before the job

A late fee only works if the customer agreed to it before the work. Put it in your terms, keep it modest, and apply it the same way to everyone.

Late fee wording for your invoice

Put the fee in the terms before the job, and repeat it on the invoice. Pick the version that fits your style, and replace the numbers.

A percent, charged once:

Payment is due within 15 days of the invoice date. Balances unpaid 15 days after the due date will have a one-time late fee of 1.5% of the balance added.

A flat fee:

Invoices are due on receipt. If an invoice is unpaid 10 days after the due date, a one-time late fee of $35 will be added.

With a pay-early note:

Due on completion. Thank you for paying promptly. A one-time $25 late fee applies to balances more than 14 days past due.

Three habits make a late fee hold up. Agree to it in writing before the work (a signed estimate with the terms is best). Charge it once and say so, so it doesn't snowball. And apply it the same way to everyone.

A fee you never charge teaches customers it isn't real. A fee you charge to a loyal customer who's two days late can cost you the next job. Use judgment, and be consistent.

6. Bill bigger jobs in stages

On a job that runs a week or more, don't carry the whole cost until the end. Bill at finished stages: after prep, after the first coat, at the end. Each invoice is smaller, easier to pay, and arrives while the customer can see progress.

7. Look at what you're owed every week

Pick a day. Pull up every open invoice, oldest first, and do something about each one past due: send the reminder, make the call, or note why you're waiting.

Track one number over time: average days to get paid. If it creeps up, a habit has slipped.

8. Know your lien rights early

If a customer just won't pay after the reminders above, see what to do when a customer won't pay for the full ladder, a demand letter and small claims basics. Most states let contractors file a mechanic's lien on the property. But lien rights come with strict deadlines that vary by state, and some states require a notice before or soon after you start work. If you'd ever rely on a lien, look up your state's rules before the job, not after it goes bad.

How Chalk helps

  • Send an invoice by text or email. The customer's page has the pay buttons, card and bank (once you've connected Stripe), plus check and cash, and they pay on your own Stripe account.
  • Invoices due in sets your normal terms (15 days unless you change it, or 0 for due on receipt).
  • Invoice reminders are automations, off until you add them: one on the day an invoice is due, and one a set number of days after. Each reminder goes once per invoice, and you can edit the wording.
  • An optional Late fee, a percent of what's owed or a flat amount, is added once after the number of days you pick. It never compounds, and it's off until you set it.
  • Bill part now on a job invoices a deposit or a mid-job draw, so you can bill in stages.
  • Each customer has a page with their quotes, invoices, a statement and receipts, so they can find the bill without calling you.

Sources

The days-to-get-paid table is simple arithmetic: monthly billing divided by 30, times the average days to get paid. The card fee figure uses a 2.9% + 30 cent rate as an example; check your processor statement for yours.