Washing is priced by the square foot, but the square foot is not where the money is made or lost. Travel and setup are the same for a small patio as for a whole property. Siding, concrete and wood move at very different speeds and use different chemicals. And small jobs are where washing businesses quietly lose money. This calculator works each surface out from your own costs, adds setup as its own line, and holds the line at your minimum.
The calculator does the math for one job. The decisions around it, such as which pricing model to use, where to sit against the market and what to add on, are in the pressure washing pricing guide.
How the calculator works
- Each surface on its own. For the house wash, concrete and the deck: area divided by your production rate gives hours, rounded to a tenth. Chemicals are a cost per 100 sq ft.
- A price for each surface. That surface's labor plus chemicals, divided by one minus overhead and margin. Divide by its area and you have your price per square foot for that surface.
- Setup and travel. Drive time, hooking up, laying out hose and cleanup are priced as their own line at the same margin, because they happen once a job no matter how big it is.
- The minimum. If the total comes in under your minimum charge, the price is the minimum, and the calculator tells you so.
The formula
- Hours for a surface =
area / sq ft per hour - Surface price =
(hours x labor cost + area / 100 x chemicals per 100 sq ft) / (1 - overhead% - margin%) - Setup price =
setup hours x labor cost / (1 - overhead% - margin%) - Job price = the larger of
sum of surface prices + setup priceand your minimum charge
Prices round up to the cent. When overhead rounding would leave the margin a fraction of a cent under target, the calculator adds a cent, so a result can be a cent above the plain division.
Worked example
The calculator opens on a full property: 2,000 sq ft of siding, 800 sq ft of driveway and walks, and a 300 sq ft deck. Labor costs $30 an hour, overhead is 15%, the target margin is 25% and the minimum is $225.
| Surface | Hours | Chemicals | Price | Per sq ft |
|---|---|---|---|---|
| House, 2,000 sq ft at 500 an hour | 4.0 | $30.00 | $250.00 | 12.5 cents |
| Concrete, 800 sq ft at 600 an hour | 1.3 | $6.00 | $75.00 | about 9 cents |
| Deck, 300 sq ft at 300 an hour | 1.0 | $6.00 | $60.00 | 20 cents |
| Setup and travel | 1.0 | $50.00 | ||
| Job | 7.3 | $435.00 |
Take the house wash: 4 hours x $30 = $120 of labor, plus $30 of chemicals, is $150. Divided by 0.60, that is $250. The house wash costs you $187.50 with overhead in and leaves $62.50, 25%. The whole job costs you $326.25 and leaves $108.75, also 25%.
These per-foot prices come from the starting numbers, which are a floor built from cost. Many markets pay more. The point of the calculator is to show what you cannot go below, and what your margin is on whatever you do charge.
Three more worked examples
Each example is one job on its own, run through this calculator. Every input is listed so you can type it in and get the same answer. The numbers are example inputs, not market data: put in your own.
Example: a 2,200 sq ft house wash
A soft wash of 2,200 sq ft of siding. That is wall area, not the home's floor area. Nothing else on the job.
| Input | Example value |
|---|---|
| Siding area | 2,200 sq ft |
| Production | 500 sq ft an hour |
| Chemicals | $1.50 per 100 sq ft |
| Labor cost per crew hour | $30 |
| Travel, setup and cleanup (drive time included) | 1 hour |
| Minimum charge | $225 |
| Overhead | 15% |
| Target profit margin | 25% |
| Step | Working | Result |
|---|---|---|
| Wash hours | 2,200 / 500 | 4.4 hours |
| Labor | 4.4 x $30 | $132.00 |
| Chemicals | 22 x $1.50 | $33.00 |
| House wash price | $165.00 / 0.60 | $275.00 ($0.125 a sq ft) |
| Setup and travel | 1 x $30 / 0.60 | $50.00 |
| Price | $275.00 + $50.00, over the $225 minimum | $325.00 |
The calculator shows 5.4 labor hours, a job cost of $243.75 (the $195 of labor and chemicals plus 15% overhead on $325) and a profit of $81.25, which is 25%. All in, that is about 14.8 cents a square foot.
Check it against the market. Fixr's soft wash range of $0.25 to $0.35 a square foot would put 2,200 sq ft at $550 to $770, and Fixr's typical whole house is $500 to $900. The $325 floor is far under both. That gap is room to price up, not a reason to price at the floor. If your real pace is slower than 500 sq ft an hour, for example on a two-story house, the floor rises fast: at 350 an hour the wash takes 6.3 hours and the price is $420.00.
Example: a 600 sq ft driveway
A two-car driveway with a surface cleaner, and nothing else on the job.
| Input | Example value |
|---|---|
| Concrete area | 600 sq ft |
| Production | 600 sq ft an hour |
| Chemicals | $0.75 per 100 sq ft |
| Labor cost per crew hour | $30 |
| Travel, setup and cleanup (drive time included) | 1 hour |
| Minimum charge | $225 |
| Overhead | 15% |
| Target profit margin | 25% |
| Step | Working | Result |
|---|---|---|
| Wash hours | 600 / 600 | 1.0 hour |
| Labor | 1.0 x $30 | $30.00 |
| Chemicals | 6 x $0.75 | $4.50 |
| Concrete price | $34.50 / 0.60, plus a cent for rounding | $57.51 ($0.096 a sq ft) |
| Setup and travel | 1 x $30 / 0.60 | $50.00 |
| Work adds up to | $57.51 + $50.00 | $107.51 |
| Price | under the minimum, so the minimum | $225.00 |
The calculator flags it: the minimum charge applies. The job costs you $98.25 ($64.50 of labor and chemicals plus 15% overhead on $225), so the profit is $126.75, a 56.33% margin. That looks rich, but it is what pays for the drive on the days you do two small jobs instead of one big one.
Check it against the market. Fixr puts a 600 sq ft driveway at $180 to $240, about $225 typical. The minimum and the market land in the same place here. Notice that the washing is only half the work-hours. A 300 sq ft driveway would take nearly as long door to door, which is why the minimum exists.
Example: a 400 sq ft deck
A wood deck wash, from a shop with different numbers: a crew hour costs more, the drive is longer, the target margin is higher and the minimum is lower.
| Input | Example value |
|---|---|
| Deck area | 400 sq ft |
| Production | 300 sq ft an hour |
| Chemicals | $2.00 per 100 sq ft |
| Labor cost per crew hour | $35 |
| Travel, setup and cleanup (drive time included) | 1.5 hours |
| Minimum charge | $175 |
| Overhead | 15% |
| Target profit margin | 30% |
| Step | Working | Result |
|---|---|---|
| Wash hours | 400 / 300, rounded to a tenth | 1.3 hours |
| Labor | 1.3 x $35 | $45.50 |
| Chemicals | 4 x $2.00 | $8.00 |
| Deck price | $53.50 / 0.55, plus a cent for rounding | $97.28 ($0.243 a sq ft) |
| Setup and travel | 1.5 x $35 / 0.55, plus a cent for rounding | $95.46 |
| Price | $97.28 + $95.46, over the $175 minimum | $192.74 |
The calculator shows 2.8 labor hours, a job cost of $134.91 and a profit of $57.83, which is 30%. All in, about 48 cents a square foot.
Check it against the market. Fixr lists $0.30 to $0.40 a square foot for a deck, or $150 to $200 for 500 sq ft. At 400 sq ft that is $120 to $160, under this shop's price, because half the price is the drive and setup. A deck on its own is hard to sell at a fair price. Sell it with the house wash, where the setup is already paid for: in the default example the 300 sq ft deck adds only $60.00. If it will be stained later, the wash belongs in the stain price; see how to price a deck stain job.
Price per square foot: published ranges
The first column is from Fixr's cost guides, updated January 31, 2025, which are national figures for what homeowners pay. The second is what this page's example inputs give for the wash alone, before setup and the minimum. They are labelled examples, not averages.
| Surface | Fixr's published range | This page's examples, wash only |
|---|---|---|
| Siding, soft wash | $0.25 to $0.35 a sq ft | $0.125 (500 sq ft an hour, $1.50 chemicals) |
| Siding, pressure washing | $0.30 to $0.80 a sq ft | |
| Vinyl siding | $0.30 to $0.40 a sq ft | |
| Brick and masonry | $0.31 to $0.37 a sq ft | |
| Stucco | $0.33 to $0.45 a sq ft | |
| Driveway, cold water | $0.30 to $0.40 a sq ft | $0.094 to $0.096 (600 sq ft an hour, $0.75 chemicals) |
| Driveway, hot water | $0.40 to $0.55 a sq ft | |
| Deck | $0.30 to $0.40 a sq ft | $0.200 in the opening example ($30 an hour, 25% margin) and $0.243 in the deck example ($35 an hour, 30% margin), both at 300 sq ft an hour and $2.00 chemicals |
| Hourly rate | $50 to $150 an hour | |
| Minimum charge | $100 to $350 is common | $175 in the deck example, $225 in the others |
Two things stand out. The wash-only floor is far below the published range on every surface, because the published price carries the drive, the setup, the minimum and what the market will pay. And the published ranges are national, so your town can sit well above or below them. Use the range as a check after you build your price, never as the price.
Where the starting numbers come from
Production rates, chemical costs, setup time and the minimum charge are typical starting points, not published figures. They change a lot with equipment. A surface cleaner on concrete is far faster than a wand, and a soft wash setup and a pressure wand cover siding at different speeds. Adjust every number to your rig and crew. Your chemical cost per 100 sq ft is easiest to find by dividing what you spent on chemicals last month by the square feet you washed. To cost a soft wash batch, the soft wash mix calculator tells you how much product goes in each tank.
For the setup line, time the drive. The drive-time cost calculator works out what a round trip costs in miles and crew time, and helps you set a service area.
Common mistakes
- No minimum charge. Small jobs cost almost as much to run as medium ones. Set a minimum and keep it.
- Measuring the house footprint instead of the walls. A house wash covers wall area: the perimeter times the wall height, plus the gables. A 2,000 sq ft home can easily have more than 2,000 sq ft of siding.
- One rate for every surface. Concrete with a surface cleaner, siding with a soft wash and a deck with a careful low-pressure wash are three different paces. Price them separately.
- Pressure on soft surfaces. Too much pressure can etch wood, strip paint and force water behind siding. Soft washing with the right chemistry is often the safer service to sell for siding and roofs.
- Ignoring the wash water. Many cities do not allow wash water, especially with chemicals in it, to run into storm drains, because storm drains often go straight to creeks and rivers without treatment. Check your city or county's stormwater rules and price in any containment or recovery gear you need.
- Forgetting the water and the drive. Long drives, no outdoor spigot or needing to bring water are setup time. Put them in the setup hours for that job.
How to use this in a quote
Price each surface as its own line on the quote: house wash, driveway and walks, deck. Your customer sees what each part costs.
- Put the add-ons you would like to sell, such as the patio, the fence, gutter brightening or sealing the driveway, on as optional extras with + Optional extra. The customer ticks what they want on their phone and the total updates.
- A Timed offer adds a dollar or percent discount with a countdown on the customer's page, starting when you send the quote. It is a good way to fill a slow week in early spring.
- For bigger jobs, set Deposit to collect to a percentage or a flat amount. The customer pays it when they approve.
Here is how to send a quote and get it approved in Chalk. Put what you will and will not do in writing with the free pressure washing contract template: surfaces, methods, plant protection and water access. If you are new to the trade, the first 90 days of a pressure washing business covers insurance, gear and your first customers.
FAQ
How much should I charge per square foot for pressure washing?
Fixr's published ranges are $0.25 to $0.35 a square foot for soft washing siding, $0.30 to $0.80 for pressure washing, and $0.30 to $0.40 for a driveway with cold water. Treat those as a market check, not your price. Build your floor from your own crew cost, chemicals and setup with the calculator above, then decide where between your floor and the market you want to sit. Small jobs always cost more per foot, because the drive and setup are the same.
What minimum charge should a pressure washing business set?
Fixr says minimums of $100 to $350 are common. Work yours out from what the smallest job really costs you, the round-trip drive, setup, a short wash and cleanup, at your full margin. The drive-time cost calculator shows what the trip alone costs. Then keep the minimum even when a customer pushes back, because every small job below it loses money.
Is soft washing priced differently from pressure washing?
Yes. Fixr lists soft washing at $0.25 to $0.35 a square foot and pressure washing at $0.30 to $0.80. Soft washing uses low pressure and a cleaning solution, so the chemical cost per 100 sq ft is higher and the pace is different. Put your soft wash pace and chemical cost in the house wash fields, and use the soft wash mix calculator to work out what each batch costs.
How do I price roof cleaning?
Not with this calculator. A roof is priced on roof area, which is bigger than the house footprint because of the overhang and the pitch, and the method is different. The Asphalt Roofing Manufacturers Association says not to use a power washer on an asphalt roof. See how much to charge for roof cleaning for the measurements, the chemicals and a worked example.
Should I offer sealing as an add-on to a wash?
It is often the best add-on to sell, because the customer sees the clean surface first. Fixr lists driveway sealing at $0.88 to $2.10 a square foot, far more per foot than the wash. Price it as its own line with its own costs, since it needs dry time and often a second trip. See how to price paver and concrete sealing.
Why is the calculator's price lower than the prices I see online?
The calculator gives your floor, the least you can charge and still make your target margin. Published prices are what customers pay across the country, and they often sit above a cost floor. The worked examples on this page show both side by side. The pressure washing pricing guide covers how to decide where to price between the two.
Sources
- Fixr, cost to pressure wash a house: per square foot ranges by method and material, the hourly rate, common minimums and the whole-house range. Updated January 31, 2025.
- Fixr, cost to pressure wash a driveway: $0.30 to $0.40 a sq ft cold, $0.40 to $0.55 hot, about $225 for 600 sq ft, and sealing at $0.88 to $2.10 a sq ft. Updated January 31, 2025.
- Fixr, cost to pressure wash a deck: $0.30 to $0.40 a sq ft, $150 to $200 for 500 sq ft. Updated January 31, 2025.
- Asphalt Roofing Manufacturers Association, algae discoloration: do not use a power washer on an asphalt roof.
- U.S. EPA, Stormwater discharges from municipal sources: why cities control what goes into storm drains. Your local rules are set by your city or county stormwater program.
- Production rates, chemical costs, setup time and the minimum charge: typical starting points. Adjust them to your rig and crew. The three worked examples use example inputs, not market data.