The price book is your list of the things you sell, each with a unit, a price and a Taxable box. It lives under Settings > Price book, which the owner and admins can open. Pick an item onto a quote line and its name, description, unit, price and tax mark fill in. Measurements go one step further and let one line be priced from several counts, like a deck priced from its boards, its railing and its stairs.
Add an item
- Go to Settings > Price book and press Add item.
- Fill in the Name and the Description. The description is shown to the customer on the quote.
- Pick the Unit: each, square foot, linear foot, hour, gallon or room.
- Enter the Price per unit. The hint under the box works an example out for you.
- Tick Taxable if this item should carry sales tax. It is unticked for a new item.
- Press Save.
That is enough to start quoting. Press Advanced in the same window for the rest:
- Available when building quotes: untick to retire the item.
- Materials: what one unit of the item uses, which gives the item a cost and fills the What to buy list on a quote.
- Common expenses: costs added to the job automatically when the item is sold, picked from the list under Settings > Lists.
- Measurements: shown when measurements are switched on (see below).
The list shows each item's Unit, Price, Cost and Margin. A margin under 40% shows in red. Use Search and Sort (name, price or newest) to find things in a long list.
Use it on a quote
- On a quote, press + Add line item.
- Press the list button at the right end of the line's name field. It only shows once your price book has at least one item.
- Pick the item. The name, description, unit and price fill in, with a quantity of 1.
- Change the Qty to the job's number.
The line is a copy. Changing the price later in your price book does not change quotes you already made, and you can change any number on the line for this one job.
Sales tax and the Taxable box
Chalk only adds tax to lines marked taxable, and only once you set a rate.
- Go to Settings > Quotes and invoices and find the Sales tax card.
- Enter the Rate as a percent (0 to 20) and the name it has on documents under Shown on documents as (it starts as "Tax"). The rate starts at 0, because many places do not tax service labor. Check with your bookkeeper.
- Go to Settings > Price book, open each item that should be taxed, tick Taxable and press Save.
From then on:
- Picking a taxable item onto a quote or invoice line brings the mark with it. Each line has its own Taxable box, so you can change it for one job. The box only shows on lines once your rate is above 0.
- Tax is the rate times the taxable lines. Lines that are not taxable add nothing.
- A discount on the quote lowers the taxed amount in proportion. For example, with a 10% discount, a taxable line is taxed on 90% of its price.
- An optional extra the customer has not ticked is not counted, so it is not taxed.
- With the rate at 0, nothing is taxed, even on lines marked taxable.
- A new rate applies to new quotes and invoices, and to an older one the next time its lines are edited.
The customer sees the tax as one line, under the name you chose.
Retire, copy and delete items
Tick the box on one or more rows to see the bulk buttons. On a phone, press Select first.
- Duplicate makes a copy of each item, named "(copy)", with its measurements and materials.
- Retire takes items off the quote picker without deleting them. Old quotes keep their lines.
- Delete removes items for good. Chalk refuses to delete an item that is on any quote, job or invoice, and asks you to retire it instead.
Retired items wait under Retired at the top of the list. Tick them and press Restore to bring them back.
Measurements: price one line several ways
Measurements are off until you switch them on. Go to Settings > Company and turn on Measure work several ways on one line. A Measurements tab then appears next to the price book. If you had none yet, Chalk adds Square feet, Linear feet and Hours to get you started.
Measurements work in two halves.
1. Name the things you count. Under Settings > Measurements, press Add one and give it a Name (Railings) and what it is Counted in (each). Shortcut buttons add the common ones: linear feet, square feet, railings, stairs, gates and rooms. Nothing here is a price.
2. Set the rate on each item. Open a price book item, press Advanced, and under Measurements press Add a measurement. For each one, set the Charge rate, for example Charge per linear foot. If your crew is paid by the piece, set the crew pay rate too (see Set up crew pay). You can add materials to each measurement.
On the quote
Pick a measured item from the price book and the line shows one row per measurement, each at zero with your rate filled in. Type the counts from the site visit: 230 linear feet, 1 set of stairs, 0 gates. The line's price is the sum of each count times its rate.
- Leave anything this job does not have at zero.
- You can change a rate on the quote for this job only.
- + Add a measurement adds another row to any line. Pick Something else... to name a new kind of measurement on the spot. Only the owner or an admin can create one.
- One line holds up to 12 measurements. Add another line for the rest.
The customer still sees one line with one price. To show them the counts too, turn on The measurements a line was priced from under Settings > Documents, in Line items. It is off until you turn it on.
Good to know
- Who can edit the price book: the owner and admins, because it lives in Settings. Anyone who builds quotes can pick from it.
- Lines are copies. Changing a price or the Taxable mark in the price book does not change quotes you already made.
- Import: a spreadsheet import can set prices and the taxable mark for many items at once. See Import your clients and price book.
- Measurements are off until you switch them on, and one line holds up to 12.
- Retire, do not delete, anything already on a quote, job or invoice. Chalk refuses to delete those.