Leads and the Funnel

Bring back repeat work with Work comes back around

Set how many months until each kind of job is due again, so finished work turns back into a lead on time, and send a repeat-work text when it does.

Updated By Adrian Gluchowski5 min read

On this page

Some work comes back on its own schedule: a deck wants staining again in two years, a house wash in one, a roof inspection in a year. In Chalk you say how many months that is for each kind of job. When a job is finished, Chalk works out the date. On that day the customer comes back as a new lead on your Funnel, with a link to the job you did, and Chalk can text them too.

How it works

  1. You give a job type a number of months in Due again after. You can also set a shop-wide default.
  2. When the job is finished, Chalk adds those months to the finish date and keeps the result on the job.
  3. On the job's page you see a line such as "We'll bring Dana back as a lead around October 2028 for more deck staining." When you mark the job complete, the same sentence shows in the confirmation message.
  4. On that day, Chalk creates the lead, and sends the Repeat-work text if you added it.

This is not the same as a recurring series of visits. See "Recurring visits vs repeat work" below.

Set months per job type (Due again)

  1. Open Settings > Lists > Job types.
  2. Tap a job type, or press Add a type for a new one.
  3. Set Due again after, in months. 24 means work finished today becomes a lead in two years. The box takes 0 to 120. 0 shows as "One and done" in the list.
  4. Press Save.

The Job types list has a Due again column that reads "6 months", "1 year", "2 years" and so on. Starter job types already carry months for some trades: deck staining 24, fence staining 36, exterior painting 60, the three pressure washing types 12, and gutter cleaning 6. See the setup page for your trade, such as Set up Chalk for deck and fence staining.

The shop default

  1. Open Settings > Hours and calendar and find A new visit.
  2. Switch on Work comes back around. It is off to start.
  3. Set Months until it is due again, from 1 to 120. It starts at 12 when you switch it on.

The hint reads "A default for job types that do not set their own." It covers a job with no type, and a type left at "One and done". Once a default is on, a type at 0 still gets the default, so there is no way to opt a single type out. Leave the default off if some work should never come back.

What happens when work comes due

On the due day, counted in your shop's time zone, Chalk:

  • Adds a lead to the first stage of your Funnel. Its title is "Repeat:" followed by the job's title. Its source is Repeat customer. It says "Due for a refresh. We last did this on" the finish date "as job #" and the number.
  • Links the lead to the old job. When you build the quote from that lead, the new job takes the same job type as the old one.
  • Does this once per job. The same job never opens two leads.

A job or customer that is archived at that time is skipped. The lead is made whether or not a text goes out, so the office can pick up the phone either way.

Work through the lead as usual: Work your leads on the Funnel.

The Repeat-work text

The text is its own automation and it is off until you add it.

  1. Open Settings > Automations.
  2. Press Add automation and pick Repeat-work text, under Jobs. Its card reads "Text when repeat work comes due".
  3. Check the words under The words. The standard text reads: "Hi {first_name}, it has been about {years} since {company} last did your {title}. Want us to take a look and quote a refresh? Just reply and we'll set up a time." Tags you can use: {first_name}, {company}, {title} and {years}.
  4. Switch it on.

It only goes when all of these are true:

  • The customer has Send this customer automatic reminders (visits, invoices and payments due, repeat work) ticked on their record (Edit, under What we send them on our own).
  • They have a number that takes texts or an email address. Without a textable number it goes by email.
  • Pause all automations is off.
  • The customer has not texted STOP.

The usual text rules apply: it waits for your texting hours, and a customer gets at most one repeat-work reminder a day. Everything is on the Message log under Settings > Messages, labelled Repeat-work text. See Automatic reminders, follow-ups and review requests.

Recurring visits vs repeat work

Recurring visitsRepeat work
ForA route: weekly mowing, monthly cleaningA job that comes due once: a re-stain, a yearly wash
You set itOn the job, with RepeatsOn the job type, in months
What Chalk doesBooks the visits on the calendarOpens a lead when the time comes
Needs a quoteNo, it books visits on a job you haveYes. The customer says yes again

See Set up recurring visits.

To sell repeat work as a plan customers sign up for, see maintenance plans.

Good to know

  • Only for jobs finished after you set the months. Chalk works the date out at the moment a job is finished. Changing a job type's months later does not change jobs already finished.
  • Reopening a job takes the date back. If you press Reopen job, the automatic date comes off, and finishing the job again works it out from the new finish date.
  • Either way of finishing counts. Marking the job complete in the office and the crew finishing its last visit both set the date.
  • No list of upcoming repeats. The date shows on each finished job. Ask ChalkBot "who is due for service" for a list.
  • Developer keys. A developer API key that is not allowed to send messages does not set the date when it finishes a job, so nobody is texted months later for something it did.