Daily routines

A crew lead's day in Chalk: route, extra work and sign-off

The crew lead routine in Chalk: the route, extra work the customer asks for, checklists, after photos, and how an owner sets up a lead role.

Updated By Adrian Gluchowski5 min read

On this page

This page is for the person who runs a crew on site. The everyday steps (On my way, clocking in, photos, finishing a visit) are the same for everyone on the crew and are covered in Crew's My Day on a phone. Here they get one line each, and the room goes to what a lead does on top: keeping the route, handling extra work the customer asks for, and checking the work before the visit is marked done. The last section is for the owner and shows how to set up a lead role.

Chalk has no separate Crew lead role. A lead uses Field crew, or a Custom role if you want them to do more.

Before you leave: the route

  1. Open Today. It lists the visits you are on, in route order. Use the arrows at the top to look at tomorrow; under the last stop, a line says what is first tomorrow.
  2. With more than one stop, press Directions at the top to map the whole route, and give the driver the order.
  3. Open each stop and read Notes for the crew, What the customer asked for and What to do with the crew before you leave. Gate codes, dogs and anything else the office marked for the crew show at the top of the stop.

A Field crew lead sees only their own visits and cannot move, book or cancel them. If the office changes the day, the stop moves on Today. A lead with a Custom role can be given everyone's calendar and Book and move visits (see the last section).

The everyday steps, in one line each

  • On my way: pick 15, 20 or 30 minutes and tap On my way; the customer is texted right away. See On my way.
  • Clock in, breaks, clock out: tap Clock in when you arrive, Take a break and Back to work in the bar at the top, and Clock out at the end. See Clock in, breaks and clock out.
  • Photos, notes and receipts: the Photo, Note and Receipt buttons on each stop. See Photos, notes and receipts.
  • No signal: notes, clocking and finishing are saved on the phone and sent later; photos and receipts need a signal. See No signal.
  • Your pay: My pay and hours at the bottom of Today. See My pay and hours.

What about location?

Chalk does not track you through the day. When your phone allows it, it asks for your location at three moments: when you clock in, when you come back from a break, and when you tap On my way. The office sees your last spot on the calendar Map for 12 hours, and Chalk keeps only the latest spot for each person. It is not saved with your hours. If you say no when your phone asks, everything still works. See How Chalk protects your data and your customers'.

Extra work the customer asks for

You cannot see prices and you cannot change what was sold, and that is on purpose. When a customer asks for more:

  1. Write it down with Note, in the customer's words, so the office has it.
  2. Call the office. The call button on the stop calls the customer, not the office.
  3. The office changes the job's charges on its What we're charging card. If the customer needs to say yes to a new price, the office can send them a separate quote for the added work.

Chalk has no change order form. See Change a quote after it is sent.

Check the work before you mark it done

The lead is usually the one who taps Finish this visit, so the finish sheet is the lead's sign-off. Use it as the walk-around list:

  1. Before the crew packs up, open the stop and tap Finish this visit.
  2. Walk the job with the sheet in hand: the visit's checklist, After photos, and an optional Note for the office. A star (*) marks a required item, and Chalk will not finish the visit while one is empty or a photo is still uploading.
  3. Fix anything that is not right while the crew is still there. A return trip costs far more than ten minutes now.
  4. Take the after photos from the same spots as the before photos, so the office can show the customer the change.
  5. Put anything the customer should not see, such as a damaged board you found, under Add a photo for the office. Before and after photos can show on the customer's own page under From the job.
  6. Leave Clock me out too ticked on your last stop of the day, then tap Mark it done. An Undo button shows right after, in case of a slip.

When it is the last visit on the job, finishing it finishes the job and the office gets an alert to invoice it. The office pressing Mark job complete does not ask for the checklist, so the sheet on site is where it gets checked.

For owners: setting up a lead role

Pick the closest fit:

If your lead should...Use
See only their own visits, with no pricesField crew, as is
Also see everyone's calendar, or move visitsCustom, with a few switches changed

To set up Custom:

  1. Open Settings > Team, scroll to What each role can do and find the Custom column. Type a name in the column header, such as "Crew lead". On a phone, pick the role under Role and use Name for the custom role.
  2. Custom starts out like Staff: sales desk on, everyone's calendar, booking and moving visits, job prices, and no invoices, spending, reports, ChalkBot or Messages inbox. Switch off what a lead should not have, usually Customers and quotes and Job prices.
  3. Choose The schedule: Everyone's or Their own, and decide on Book and move visits.
  4. Leave My pay and hours on. It is on for every role to start.
  5. Give one person the role: tap them on the team list and change What can they do?.
  6. Press See their view on their row to check exactly what they will see.

On a phone, a custom role with Customers and quotes and Reports both off gets the field crew's tab bar, with Today in it. Invoices, spending and the Messages inbox stay off unless you switch them on. Each switch saves on its own. See Roles and permissions and Add your team.

For duties, pay and what a lead may approve, see making someone a crew lead.

Good to know

  • A person has one clock at a time.
  • The On my way text goes out even outside your sending hours, because it names a time.
  • Field technicians do not see prices on Today unless Job prices is turned on for their role.