Free tool

Cabinet painting price per door calculator

Count doors, drawer fronts and feet of boxes. Get the hours, the job cost, the price at your margin and what that comes to per door.

Adrian GluchowskiOwner of Superior Stain Solutions, builder of ChalkLast reviewed

The kitchen
Time, all steps

Typical starting points, adjust to your crew. Time a few jobs and put in your own numbers.

Materials
Your numbers

Price per door

-
Door count used
-
Whole job
-

Behind the price

Labor hours
-
Materials
-
Labor
-
Overhead
-
Job cost
-
Profit
-

Customers understand a price per door. They can count their doors, compare quotes and decide fast. The trouble is that a door is not where all the work is. The boxes, face frames, end panels, masking and setup are real hours, and a per-door number pulled from a forum post has no idea how many of them your kitchen has. This calculator prices the whole job from hours and materials, then tells you what it comes to per door.

How the calculator works

  1. Count the parts. Doors, drawer fronts, and the linear feet of cabinet boxes and face frames, uppers and lowers, measured along the wall.
  2. Time for each part, all steps included. For a door that means take it down, label it, degrease, scuff or sand, prime, two finish coats, dry time handling and rehang. Drawer fronts are usually about half a door. Boxes and frames are hours per foot. Setup covers masking counters, floors and appliances and building a spray area.
  3. Materials. A cost per door or drawer front (degreaser, primer, paint, sandpaper) and a cost per foot of boxes.
  4. Price. Labor plus materials, divided by one minus overhead and margin.
  5. Per door. The price divided by the door count, with each drawer front counted as part of a door (half, unless you change it).

The formula

  • Hours = doors x hours per door + drawers x hours per drawer + box feet x hours per foot + setup
  • Materials = (doors + drawers) x materials each + box feet x materials per foot
  • Price = (hours x labor cost + materials) / (1 - overhead% - margin%)
  • Price per door = price / (doors + drawers x drawer share)

Worked example

The calculator opens on a mid-size kitchen: 22 doors, 8 drawer fronts and 30 feet of boxes. Labor costs $35 an hour, overhead is 15% and the target margin is 25%.

  • Hours: 22 x 1.5 = 33 for doors, 8 x 0.75 = 6 for drawer fronts, 30 x 1 = 30 for boxes and frames, plus 6 for setup. 75 hours in all.
  • Labor: 75 x $35 = $2,625.
  • Materials: 30 pieces x $8 = $240, plus 30 feet x $5 = $150. $390 in all.
  • Direct cost: $3,015.
  • Price: $3,015 / (1 - 0.15 - 0.25) = $3,015 / 0.60 = $5,025.00. Overhead is $753.75, the job costs you $3,768.75 and the profit is $1,256.25.
  • Per door: 22 doors plus 8 drawer fronts at half a door is 26 doors. $5,025 / 26 = $193.27 a door. This per-door number carries the boxes, drawer fronts and setup, so it is not comparable with a cost guide's price per door, which is for the door alone.

Now notice the boxes. They are 30 of the 75 hours. A kitchen with the same 22 doors but a long run of open shelving, an island with paneled ends and a pantry wall could have twice the box footage. The door count would say the same price. The hours would not. That is why the per-door number should come out of the math, not go into it.

This calculator's starting numbers are typical defaults and differ from the worked example in How much to charge for cabinet painting; put in your own.

Where the starting numbers come from

The time and material figures in the calculator are typical starting points, not published figures. Adjust them to your crew and your process. A shop that sprays doors in a booth back at the shop and brushes boxes on site moves at a different pace from one that does everything in the kitchen. Time your next two kitchens step by step and use your own numbers.

Product dry and recoat times come from the coating's data sheet. Cabinet enamels can need a long wait between coats and longer still to cure hard, so check the sheet for the product you use. Dry time does not cost labor hours, but it does cost calendar days, so plan the schedule around it.

Common mistakes

  • Quoting a forum price per door. It was somebody else's labor cost, process and kitchen. Work out your own from hours.
  • Leaving out boxes and end panels. Price them by the foot so a big kitchen is not the same price as a small one with the same door count.
  • Skimping on degreasing. Kitchen grease is the most common reason cabinet paint fails. It takes time; put that time in the price.
  • Not counting both sides. The back of a door gets primer and two coats too, and has to dry before it is flipped.
  • Forgetting hardware. New hinge holes, filling old pull holes or swapping hardware is extra work. Price it as its own line.
  • Lead in older kitchens. Sanding paint in a home built before 1978 falls under the EPA's Renovation, Repair and Painting rule, which requires a certified firm and lead-safe work practices.

How to use this in a quote

Put the job on the quote as the main line. Cabinet customers often want to add things once they see the price, and optional extras handle that cleanly:

  • Add choices like "Paint the island a second color", "Fill the oak grain" or "New hardware installed" with + Optional extra, each at its own price. The customer ticks what they want on their phone and the total updates.
  • Cabinet jobs tie up your crew for days, so a deposit matters. Set Deposit to collect as a percentage or a flat amount, and the customer pays it when they approve.
  • If you want to fill a slow week, a Timed offer adds a dollar or percent discount with a countdown on the customer's page, starting when you send the quote.

Here is how to send a quote and get it approved in Chalk.

Sources

  • U.S. EPA, Renovation, Repair and Painting program: certification for paid work that disturbs paint in pre-1978 homes.
  • Hours per door, drawer front and foot of boxes, setup time and materials: typical starting points. Adjust them to your crew.