"What do you charge per door?" is the first question a cabinet customer asks. It is also a trap. A per-door price can be right, but only if it includes the drawer fronts, the cabinet boxes, the setup and the hardware, and only if you know how long a door actually takes you.
This guide shows how to build a per-piece price list from your own costs: count the pieces, time each step, add setup and materials, and turn it into prices for doors, drawer fronts and boxes that cover overhead and leave a profit.
What homeowners see online
Fixr's guide to painting kitchen cabinets (updated January 2026) is a typical example:
| What | Fixr's range |
|---|---|
| Whole kitchen | $2,500 to $6,500, average about $4,000 |
| Per door | $70 to $125 |
| Per drawer front | $30 to $110 |
| Per cabinet (box) | $75 to $150 |
| Per linear foot / per square foot | $30 to $70 / $3 to $10 |
| Small kitchen, 15 to 20 doors and drawers | $1,000 to $3,500 |
| Medium kitchen, 30 to 45 doors and drawers | $3,500 to $7,000 |
| Large kitchen, 50 or more | $5,000 to $10,000+ |
| Cabinet repairs / new hardware | $150 to $500 / $100 to $1,000+ |
| Typical professional timeline | Four to five days |
Fixr puts labor at about 85% of the total and painter pay at $20 to $50 an hour. Treat all of this as a rough check after you have built your own price.
Why a flat per-door price is risky
A door has two faces, an edge and a profile. A drawer front is small. A cabinet box has a face frame, sides and sometimes an interior. A kitchen with 20 doors and 12 boxes is a different job from a kitchen with 20 doors and 2 boxes. If you quote one number "per door," you either pad it or lose money on the kitchens with more work.
So price the pieces separately: doors, drawer fronts, boxes (face frames and visible ends), plus the setup. You can still give the customer one friendly number, or a per-door price that you know covers everything else.
Step 1: Count the pieces
Walk the kitchen with a notepad or your phone.
| Piece | What to note |
|---|---|
| Doors | Count each. Slab, shaker or raised panel? Glass? Size. |
| Drawer fronts | Count each. |
| Boxes | Face frames and visible end panels, in place. Count the boxes. |
| Extras | Toe kicks, crown, open shelves, island ends, pantry, interior faces |
| Hardware | Count pulls and hinges. Are they staying? Who replaces them? |
| Condition | Greasy, chipped, peeling, previously painted? Wood, MDF, laminate or thermofoil? |
Raised-panel and detailed profiles take more time than flat slab doors. The surface also changes the prep. Sherwin-Williams' Emerald Urethane Trim Enamel data sheet says glossy surfaces should be sanded dull. Slick factory finishes such as laminate or thermofoil need a primer made to bond to them, so read the primer's data sheet for the surfaces it is listed for. Take photos, and write the surface type on the estimate.
Step 2: List every step in the process
Price the work you do, not just the painting.
- Remove doors, drawers and hardware. Number them and bag the hardware.
- Degrease and clean. Kitchens are greasy.
- Sand, fill and repair.
- Mask the kitchen and set up your spray area or work space.
- Prime.
- Sand lightly between coats.
- Two topcoats. Sherwin-Williams' sheet calls for one coat of primer and two coats of Emerald on interior wood or drywall, with a four-hour recoat time.
- Let the finish harden before you handle it.
- Reinstall, adjust, touch up.
Each of those is hours. Setup and reinstall are fixed for the job. Prep and coats scale with the number of pieces.
Step 3: Materials
The coverage on the Emerald data sheet is 350 to 400 sq ft per gallon at 4 mils wet. A door about 15 by 30 inches has about 3.1 sq ft per face, so about 6.5 sq ft with both faces and edges. With a primer and two topcoats, that is about 20 sq ft of coverage per door. Spraying wastes more than brushing, so track your own usage per kitchen.
Fixr gives a sense of paint cost: $12 to $25 a gallon for latex and $20 to $65 for oil-based. Cabinet enamel costs more than wall paint, so use your own supplier price. Add the things that get used up: degreaser, sandpaper, masking, spray tips and filters, rags, bags for hardware.
Step 4: Production rates
No data sheet gives production rates for cabinets, and the figures published online are contractor marketing pages that disagree with each other. Fixr says a typical professional job takes four to five days, which is useful as a check on the total but not on a single door.
So time your own. On the next three kitchens, record the hours for each of these, then divide by the number of pieces:
| Task | Pieces | Hours | Hours per piece |
|---|---|---|---|
| Remove, label, degrease | |||
| Sand and fill, doors | |||
| Prime, doors | |||
| Two topcoats, doors | |||
| Drawer fronts, all steps | |||
| Boxes and face frames, all steps | |||
| Mask and set up | |||
| Reinstall and touch up |
Keep doors, drawer fronts and boxes separate. You will see that boxes take longer per piece than doors, because they are painted in place.
Step 5: From cost to price
Labor cost is wage plus burden. The Bureau of Labor Statistics lists $23.75 an hour as median pay for painters in May 2025, and one estimating guide puts payroll taxes, workers' compensation and other costs at 25% to 40% of wages. Add materials to get direct cost, then:
Price = direct cost / (1 - overhead % - profit %)
For why you divide rather than add a markup, see How to price a deck stain job.
A worked example
The job: a kitchen with 22 doors, 8 drawer fronts and 12 cabinet boxes (face frames and visible ends), sprayed in a shop and painted in place for the boxes. Prime and two coats of enamel.
Placeholders: labor costs $32.50 an hour (a $25 wage plus 30% burden). Overhead is 20% of price and profit is 15%.
Hours (rates from a made-up time log):
| Task | Quantity and rate | Hours |
|---|---|---|
| Doors, all steps | 22 at 1.0 hr | 22.0 |
| Drawer fronts, all steps | 8 at 0.5 hr | 4.0 |
| Boxes, all steps | 12 at 1.5 hr | 18.0 |
| Remove, label, degrease, mask, set up | 1 job | 5.0 |
| Reinstall, adjust, touch up | 1 job | 4.0 |
| Total | 53.0 |
Materials: surface is about 263 sq ft (doors 143, drawer fronts 24, boxes 96). Three coats at 350 sq ft per gallon is 2.3 gallons, so 3 gallons with spray loss.
| Item | Cost |
|---|---|
| Primer, 1 gal | $60 |
| Enamel, 2 gal at $90 | $180 |
| Degreaser, sandpaper, masking, tips, filters | $120 |
| Total | $360 |
From cost to price:
| Item | Amount |
|---|---|
| Labor, 53.0 h x $32.50 | $1,722.50 |
| Materials | $360.00 |
| Direct cost | $2,082.50 |
| Price = $2,082.50 / 0.65 | $3,204 |
| Overhead share (20%) | $641 |
| Profit share (15%) | $481 |
Turn it into a per-piece price list. Spread the setup hours and consumables across the pieces in proportion to the hours each one takes, then divide by 0.65 and round:
| Line | Quantity | Price each | Total |
|---|---|---|---|
| Door | 22 | $74 | $1,628 |
| Drawer front | 8 | $36 | $288 |
| Cabinet box (face frame and ends) | 12 | $108 | $1,296 |
| Total | $3,212 |
Check it. Every line is inside Fixr's ranges ($70 to $125 a door, $30 to $110 a drawer front, $75 to $150 a box), toward the low end. With 30 doors and drawer fronts the kitchen would be a "medium" in Fixr's table, which runs $3,500 to $7,000, so $3,212 is under it. Billed per labor hour it is $60. If your time log backs the hours, you can charge less than average and still keep your margin. If you are not sure, price toward the middle of the range and see how often you win.
Hardware, repairs, a color match, glazing and interior painting are extra lines. Fixr lists $150 to $500 for repairs and $100 to $1,000 or more for new hardware.
Common mistakes
- One per-door price for every kitchen. Count the boxes and drawer fronts.
- Forgetting setup and reinstall. In the example they are 9 of 53 hours.
- Ignoring cure and handling time. Rehang when the finish is hard enough. Chips from early handling are a callback.
- Skipping the degrease. Grease on cabinets stops paint from sticking. Put it in the scope.
- Under-counting spray losses. Track real usage and adjust.
- No workspace plan. Where will 30 doors dry? Whose garage? That is a job cost.
- Not writing down the surface. If a customer's laminate fails, you want the estimate to show what was agreed.
- Markup instead of margin. See the table in the deck guide.
How Chalk helps
This part is about our software.
- Price book. Add Door, Drawer front and Cabinet box as price-book items with the unit each and your price per unit. Building a kitchen quote is then three quantities. See Send a quote and get it approved.
- Optional extras. Mark hardware replacement or interior painting as an Optional extra so the customer ticks what they want.
- Digital quote and invoice. Send the quote and invoice as links, ask for a deposit on the quote, and download a PDF if you want to hand a copy over.
Looking for a quick number? Try the cabinet painting price calculator.
Sources
Prices and rates change and vary by region. Check the current version of each source.
- Fixr: cost to paint kitchen cabinets, updated January 27, 2026.
- Sherwin-Williams Emerald Urethane Trim Enamel, product data sheet, July 2025.
- U.S. Bureau of Labor Statistics: painters, construction and maintenance.
- CompositePaint: how to estimate a paint job. An estimating guide, used for the labor burden range.