Free tool

Drive-time cost calculator for service businesses

Enter the miles, the minutes and the crew. See what getting to the job costs, what it adds to each stop, and the least a small job should charge.

Adrian GluchowskiOwner of Superior Stain Solutions, builder of ChalkLast reviewed

The trip
The job

Cost of the trip

-
Mileage
-
Crew time
-
Per job on this trip
-

Minimum charge

-
Smallest job, crew cost on site
-

The math

-

A trip across town costs two things: the miles on the truck and the time of the people in it. The time is bigger, and it is the part most quotes leave out. This calculator adds both, splits them across the jobs on the route, and works out the least a small job has to charge to cover the drive and still make its margin.

How it works

  1. Mileage. The round-trip miles times the cost per mile. The box opens on the IRS business rate, and you can type your own.
  2. Crew time. The round-trip drive minutes divided by 60, times the people in the truck, times the cost of one person's hour.
  3. The trip. Mileage plus crew time.
  4. Per job. The trip divided by the jobs you do on that trip. A route with 3 stops shares the drive three ways.
  5. The smallest job's cost on site. Its minutes divided by 60, times the people, times the hourly cost.
  6. Minimum charge. The drive per job plus the cost of the smallest job on site, divided by one minus your margin, rounded up to the cent.

The IRS rate and what it means

The IRS publishes a standard mileage rate for business use of a car, van, pickup or panel truck. It is a rate for tax deductions, based on an annual study of the fixed and variable costs of running a vehicle. It is a fair average, and it is not your truck's bill. A loaded work truck that tows may cost more per mile, and a small car less. If you know your own number from fuel, repairs, tires, insurance and depreciation divided by miles, type it in.

The rate changes. It was 72.5 cents a mile from January 1, 2026, and the IRS raised it to 76 cents for July 1 through December 31, 2026. The box opens on 76 cents. The IRS sets a new rate for each year, usually announced in late December, so if you open this page in the new year, look up the current rate and type it in. The page reminds you when the year has turned. What the rate means at tax time is in tax deductions for service contractors.

Worked example

The calculator opens on a trip of 24 miles round trip and 40 minutes of driving, with 2 people in the truck. Each person's hour costs $30 with taxes and comp. The smallest job you would take is 45 minutes on site, with a 20% margin.

  • Mileage: 24 x 76 cents = $18.24.
  • Crew time: 40 / 60 x 2 people x $30 = $40.00.
  • The trip: $18.24 + $40.00 = $58.24.
  • The smallest job's cost on site: 45 / 60 x 2 x $30 = $45.00.
  • Minimum charge: ($58.24 + $45.00) / (1 - 0.20) = $129.05.

The same trip with three jobs on it. The $58.24 is shared three ways, which is $19.41 each. The minimum for the smallest job drops to ($19.41 + $45.00) / 0.80 = $80.52.

Sharing the drive across three stops lowers that minimum by $48.53. That is why route density can matter as much as a price rise.

Setting a minimum charge

  • Work it from your smallest real job, not an average. The minimum has to hold when the job is small and far.
  • Use the stops you really get. If most of your trips are one job, set the stops to 1. If you build routes, use the usual number, but check the minimum still works for a one-job trip.
  • Round up to a friendly number. $129.05 becomes $130 or $135.
  • Say it in writing. "Minimum service charge $130" on the quote and the website saves the argument.
  • Consider a trip charge instead. Some businesses charge a flat trip fee beyond a set distance. The trip cost here is the number to base it on.

Drawing your service area

Run the calculator for the farthest place you would go. Compare the trip cost with the margin on the job. If the drive eats most of a typical job, either charge a trip fee or do not go. A few ways to draw the line:

  • Zones. Price the near zone as usual, add a fee for the next ring, and decline the rest.
  • Days. Do far work on one day a week and fill the day with several jobs in that area.
  • Minimums by distance. A higher minimum for the outer zone gives you a fair price for small jobs and lets big jobs go through.

Zones and route days are covered in scheduling and routing for service crews.

If you use Chalk, a crew member's On my way text can carry an estimated drive time when the phone shares its location. Chalk does not plan or add up drive time across the day, so this calculator is still how you price the drive. See Crew: My day.

FAQ

What is the IRS mileage rate for 2026?

72.5 cents a mile for business use from January 1, 2026, and 76 cents a mile for July 1 through December 31, 2026. A new rate comes out each year.

Should I use the IRS rate to charge customers?

It is a reasonable average to start from. What you charge is a business decision. The calculator also counts the crew's time, which the mileage rate does not.

Should I charge for the drive?

Either charge a trip fee or build the drive into the price and the minimum. Either way the drive has to be paid for by someone, and it should not be you.

Do I charge for the drive both ways?

The calculator uses the round trip, because the crew drives home too. If you are going on to another job, share the trip over the stops instead.

Why do I enter a cost for a person's hour?

Drive time is paid time. The people in the truck are on the clock and not billing. Use the wage plus payroll taxes and comp, not only the wage.

Sources

  • Internal Revenue Service, Notice 2026-10: the 2026 standard mileage rates, including 72.5 cents a mile for business use from January 1, 2026.
  • Internal Revenue Service, Announcement 2026-11, in Internal Revenue Bulletin 2026-29: the business rate of 76 cents a mile for July 1 through December 31, 2026.
  • Internal Revenue Service, Standard mileage rates: the current rates and what they cover.
  • Round-trip miles, drive minutes, crew size, hourly cost, margin and the smallest job are your own numbers. The ones filled in are examples.