A revenue goal is a number. To hit it you need a number of jobs, which needs a number of estimates, which needs a number of leads. This calculator works backward from the year you want to the week in front of you, using your own close rate, so the target turns into something you can count on a Monday.
How it works
- Jobs. The goal divided by your average job, rounded up.
- Estimates. The jobs divided by your close rate, rounded up. If you win 35 of every 100 estimates, 139 jobs take 398 estimates.
- Leads. The estimates divided by the share of leads that get as far as an estimate, rounded up. Some people never answer, are out of your area, or want something you do not do.
- Per week. Each yearly number divided by the weeks you work.
- The levers. What the leads would drop to if one thing got better: the close rate up 5 points, the average job up 10%, or the leads that get an estimate up 5 points.
Working out your close rate
Your close rate is the estimates you won divided by the estimates you sent. Pick Work it out and type the two numbers. Use a stretch long enough to count: the last year, or the last 6 months in a busy trade.
Count against dollars. There are two ways to count, and they can differ a lot. Say you send ten estimates: nine small jobs at $500 each and one at $5,500. You win all nine small ones and lose the big one.
- By count, you won 9 of 10, a close rate of 90%.
- By dollars, you won $4,500 of the $10,000 you sent, a close rate of 45%.
This calculator works from the count close rate and the average size of the jobs you win, so it matches how the goal is made: jobs times the average job. If your big estimates close at a different rate than your small ones, run it twice.
Count an estimate once, when it is final. An estimate you revised is one estimate, not two. Leave out jobs you were asked to quote but never intended to take. To find out why the rest say no, see why you lose estimates.
In Chalk, the Marketing view of Reports shows your leads and your win rate for the last 90 days, and the What happens to estimates chart on Money shows what was won, lost or expired. See Reports in Chalk.
Worked example
The calculator opens on a $250,000 year with an average job of $1,800. The close rate is 35% and 70% of leads get an estimate. The owner works 48 weeks.
- Jobs: $250,000 / $1,800 = 138.89, so 139 jobs, 2.9 a week.
- Estimates: 139 / 0.35 = 397.14, so 398 estimates, 8.3 a week.
- Leads: 398 / 0.70 = 568.57, so 569 leads, 11.9 a week.
- From counts: 120 estimates sent and 42 won is 42 / 120 = 35%.
Which lever moves most
The same goal, the same year, with one thing improved at a time:
| What improves | Leads needed | Saved |
|---|---|---|
| Nothing changes | 569 | none |
| Close rate up 5 points (35% to 40%) | 498 | 71 leads |
| Average job up 10% ($1,800 to $1,980) | 519 | 50 leads |
| Leads that get an estimate up 5 points (70% to 75%) | 531 | 38 leads |
In this example, closing a few more of the estimates you already give saves the most leads, and it costs nothing but better follow-up. A higher average job helps too, and it also lifts the profit on every job. Chasing more leads usually costs the most. The size of each lever changes with your numbers, so put in yours.
Plan next year in 15 minutes
- Pull last year's numbers: revenue, jobs, estimates sent, estimates won.
- Work out your average job and close rate from those.
- Set a goal that is a stretch but not a leap. Pick a rise your crew can actually deliver, and check it in step 5.
- Run the calculator. Compare the leads a week to what you get now. If the gap is big, look at the levers.
- Check that you can do the work with the crew capacity calculator, and that the goal clears the break-even point.
- Write the weekly numbers on the wall: leads, estimates and jobs. Compare them on Fridays. The rest of the year-end planning list is in the year-end checklist.
FAQ
What is a good close rate for a contractor?
It depends on the trade, where your leads come from and how much you screen them before you quote. Rather than compare yourself with a number you read, count your own and watch whether it moves.
What is the quote-to-close ratio?
The same thing as the close rate: jobs won divided by estimates sent.
Why do I need the leads number?
Because leads are what you buy or earn: through ads, reviews, referrals and signs. Estimates and jobs follow from them. If the leads a week are far above what you get, you either need to market more or lift the close rate.
Do I include repeat customers?
Yes if they get an estimate like anyone else. A repeat customer that books by text without an estimate is a job with no estimate: lower the goal by what you expect from them, or count them as leads that need no estimate.
Why does it round up?
Because 138.89 jobs is not a thing. Rounding up makes sure the plan is never a job short.
Sources
- All the math is division and the rounding is up to the next whole job, estimate or lead.
- The starting numbers (a $250,000 goal, a $1,800 average job, 35% and 70% rates, 48 weeks) are examples to replace with your own. They are not averages for any trade.