Interior painting looks simple to price: a room is a room. But a bedroom with a color change, three coats on the trim and a drywall patch is a different job from the same bedroom with a refresh in the same white. The price has to follow the scope.
This guide gives a method for pricing interior work by the surface: measure walls, ceilings, trim and doors, price the prep, work out paint from the data sheet, turn production rates into hours, and finish with a price that covers overhead and profit.
What homeowners see online
Fixr's guide to painting a room (updated January 2025) gives these ranges:
| What | Fixr's range |
|---|---|
| Walls only, per sq ft | $1.50 to $3.50 |
| Walls, ceiling and trim, per sq ft | $3 to $4 |
| A 144 sq ft room, walls only / entire room | $215 to $505 / $430 to $575 |
| A 200 sq ft room, walls only / entire room | $300 to $700 / $600 to $800 |
| Ceiling add-on, per sq ft | $0.50 to $3 |
| Interior door or window, each | $35 to $50 |
| Moving furniture, per room | $50 to $70 |
| Wall repairs / sanding and patching, per room | $75 to $350 / $50 to $115 |
| Painter hourly rate | $25 to $100 |
Check the room-size rows against the per-square-foot ones: 144 x $1.50 is $216 and 144 x $3.50 is $504. So Fixr's "per sq ft" is per square foot of floor in the room, not of wall. Always check what the unit is when you compare prices.
Step 1: Measure
Measure each surface type separately. They take different amounts of time.
| Surface | How to measure |
|---|---|
| Walls | Room perimeter x ceiling height, minus openings |
| Ceilings | Length x width |
| Baseboard | Perimeter minus door openings, in linear feet |
| Window and door casing | Linear feet around each opening |
| Crown molding | Perimeter, in linear feet |
| Doors | Count them. Note flat or paneled, and whether both sides are painted. |
| Closets, stairwells, built-ins | Measure each as its own small room |
An example: a 12 by 14 ft room with 8 ft ceilings has a perimeter of 52 ft and 416 sq ft of wall before openings. For openings, one estimating guide says to deduct only those larger than about 50 sq ft. Pick a rule and stick to it.
Note what makes the room slower: ceilings above 9 ft, stairwells, textured walls, a dark color over a light one, furniture that has to move, and rooms people still live in.
Step 2: Price the prep
- Patch and sand. Fixr's room guide lists $50 to $115 per room for sanding and patching and $75 to $350 for wall repairs. Or time it and bill it by the hour. For the full method on patches, with drying time and trips, see How to price drywall repair.
- Caulk. Gaps at trim and corners.
- Prime. Stains, patches, bare drywall and big color changes need a primer coat.
- Glossy trim. Sherwin-Williams' Emerald Urethane Trim Enamel data sheet says glossy surfaces should be sanded dull.
- Furniture and floors. Cover or move it. Set a per-room charge or an hourly one.
Step 3: Work out the paint
| Product (data sheet) | Coverage per gallon | Timing |
|---|---|---|
| Sherwin-Williams ProMar 200 Zero VOC Interior Latex Flat | 350 to 400 sq ft (4 mils wet) | Touch dry in 1 hour, recoat in 4 hours |
| Sherwin-Williams Emerald Urethane Trim Enamel | 350 to 400 sq ft | Touch dry in 2 hours, recoat in 4 hours. Apply above 50 F. |
| Fixr | About 400 sq ft per coat | Two coats need about twice the paint |
Gallons = area x coats / coverage, plus a small allowance for waste. Textured walls, new drywall and porous surfaces take more. One estimating guide budgets 200 to 300 sq ft per gallon when you change color.
Step 4: Production rates
The paint makers do not publish production rates. Estimating guides do. These come from one of them (CompositePaint), per painter-hour per coat on a prepared surface:
| Task | Rate |
|---|---|
| Walls, smooth drywall, cut and roll | 150 to 200 sq ft |
| Walls, textured or knockdown | 75 to 125 sq ft |
| Walls, spray plus back-roll, empty room | 400 to 600 sq ft |
| Ceilings, roll | 175 to 225 sq ft |
| Baseboard, brush | 60 to 100 linear ft |
| Door and window casing, brush | 40 to 60 linear ft |
| Crown molding, brush | 50 to 80 linear ft |
| Interior door, both sides and edges | 30 to 45 minutes |
Treat these as a place to start. One estimating program's default uses an example of 125 sq ft per hour on walls for one coat that becomes 85 sq ft per hour for two, so the second coat goes faster. It is an example, not a measured rate, but it shows why you should time first and second coats on your own jobs.
Time five rooms with your crew. Split the log by task: prep, walls, ceiling, trim, doors, cleanup. Use your slower average when you quote.
Step 5: From cost to price
Labor is the biggest part of an interior bill. One estimating guide says labor is 70% to 85% of a typical residential repaint. The wage is only part of it. The Bureau of Labor Statistics lists $23.75 an hour as median pay for painters in May 2025, and the guide puts payroll taxes, workers' compensation and other costs at 25% to 40% on top of wages. Add materials to get direct cost. Then:
Price = direct cost / (1 - overhead % - profit %)
The reasons for dividing instead of adding a markup, and a markup vs margin table, are in How to price a deck stain job.
A worked example
The job: a 12 by 14 ft bedroom with 8 ft ceilings, walls going from beige to gray (two coats), the ceiling and trim repainted white over white (one coat), one door painted both sides, light patching. Some furniture to move.
Placeholders: labor costs $32.50 an hour (a $25 wage plus 30% burden). Overhead is 20% of price and profit is 15%.
Measure: walls 52 ft x 8 ft = 416 sq ft, minus a door (20 sq ft) and two windows (30 sq ft) = 366 sq ft. Ceiling 168 sq ft. Trim 94 linear ft (baseboard 49, door and window casing 45).
| Task | Quantity and rate | Hours |
|---|---|---|
| Walls, two coats | 732 sq ft of coats at 175 sq ft/hr | 4.2 |
| Ceiling, one coat | 168 sq ft at 200 sq ft/hr | 0.8 |
| Trim, one coat | 94 ft at 50 ft/hr | 1.9 |
| One door, both sides, two coats | 2 x 40 min | 1.3 |
| Move furniture, mask, patch, sand | allowance | 2.0 |
| Cleanup | allowance | 0.5 |
| Total | 10.7 |
Materials:
| Item | Cost |
|---|---|
| Wall paint: 732 / 375 = 1.95 gal, 2 gal at $38 | $76 |
| Ceiling paint, 1 gal | $34 |
| Trim enamel, 1 gal | $55 |
| Primer for patches, 1 gal | $30 |
| Tape, plastic, caulk, patch, sandpaper, roller covers | $45 |
| Total | $240 |
From cost to price:
| Item | Amount |
|---|---|
| Labor, 10.7 h x $32.50 | $347.75 |
| Materials | $240.00 |
| Direct cost | $587.75 |
| Price = $587.75 / 0.65 | $904 |
| Overhead share (20%) | $181 |
| Profit share (15%) | $136 |
Check it. $904 over 10.7 labor hours is about $84 billed per labor hour, inside Fixr's $25 to $100 range for painters. Against Fixr's room table, a 168 sq ft room runs roughly $500 to $670 for an entire room, so this price is above it. The extra comes from the color change, the patching and the furniture, which a basic room price does not include. If a competitor quotes $600 for the plain version, you now know the real gap and can offer a lighter scope, rather than just cut the price.
Price per room: 10 by 10, 12 by 12 and 12 by 14
Customers ask for a room price, and "how much to paint a 12 by 12 room?" is one of the most common questions. Here are three common sizes priced with the same method as the worked example, so you can see how the scope changes the number.
Assumptions: 8 foot ceilings, one door and one window (35 sq ft of openings taken off the walls), walls two coats at 175 sq ft per hour, ceiling one coat at 200 sq ft per hour, trim (baseboard plus door and window casing) one coat at 50 feet per hour, 1.0 hour for setup, masking and cleanup. Wall and ceiling paint is $38 and $34 a gallon at 375 sq ft per gallon, trim enamel costs $8 for the room, supplies are $15. Paint is charged for what the room uses, not whole cans, as if leftovers go to the next room. Labor is $32.50 an hour, overhead 20% and profit 15%, so price is direct cost divided by 0.65. The rates are the middle of the ranges earlier in this guide, and the money is placeholder.
| Room | Wall area | Ceiling | Trim | Walls only | Walls and ceiling | Walls, ceiling and trim |
|---|---|---|---|---|---|---|
| 10 x 10 | 285 sq ft | 100 sq ft | 70 ft | 4.3 h, $325 | 4.8 h, $364 | 6.2 h, $446 |
| 12 x 12 | 349 sq ft | 144 sq ft | 78 ft | 5.0 h, $381 | 5.7 h, $437 | 7.3 h, $528 |
| 12 x 14 | 381 sq ft | 168 sq ft | 82 ft | 5.4 h, $410 | 6.2 h, $475 | 7.8 h, $569 |
Per square foot, two ways.
- Per square foot of floor (the way Fixr's room table works): walls only is $3.25 for the 10 by 10, $2.65 for the 12 by 12 and $2.44 for the 12 by 14. Smaller rooms cost more per floor foot, because setup is the same.
- Per square foot of wall: walls only is $1.14, $1.09 and $1.08 per wall sq ft. That is steadier, which is why it is the better unit to quote by when you can measure.
Check it. Fixr's table (earlier in this guide) has a 144 sq ft room at $215 to $505 for walls only and $430 to $575 for the entire room. The 12 by 12 above is $381 and $528, inside both. A plain refresh with no patching, no furniture moving and the same color will come in lower, and a color change over dark, a ceiling with texture or heavy patching will come in higher. These are not prices to put on a menu. Use them to see where your own times land.
What changes the room price most:
| Change | Effect |
|---|---|
| Ceiling 9 or 10 feet instead of 8 | More wall area and slower cutting in. Time it. |
| Dark to light color change | A primer or an extra coat |
| Textured walls | Slower rolling. The guide's rate is 75 to 125 sq ft per hour. |
| Patching and sanding | Hourly, and see the drywall guide |
| Furniture to move | A line: Fixr lists $50 to $70 a room |
| Two doors, closets | Count them as extra trim and door lines |
Pricing the whole house
Price room by room, then add whole-house items: protecting floors, stairs, travel, a minimum for small jobs. Bigger jobs are cheaper per room because setup is shared. A good price sheet shows each room as a line, so the customer can drop a room without redoing the quote.
Common mistakes
- Pricing by square foot of floor and ignoring ceiling height. A 10 ft ceiling adds 25% to the wall area compared with 8 ft.
- Pricing a color change as a refresh. Dark to light means a primer coat or a third coat.
- Forgetting trim. It is slow brush work, and it is priced by the linear foot, not the square foot.
- Assuming walls are ready. Write the prep into the estimate and say what is extra.
- No lead check on older homes. Check the age of the house before you quote.
- Dropping the minimum. A one-room job still takes a trip, setup and cleanup.
- Markup instead of margin. See the table in the deck guide.
How Chalk helps
This part is about our software.
- Price book. Add your wall, ceiling, trim and door lines to the price book with a unit (sq ft, lin ft, each, room, hour) and a price per unit. Pick them when you build the quote. See Send a quote and get it approved.
- Optional extras. Mark ceilings or an accent wall as Optional extras so the customer ticks what they want.
- Digital quote and invoice. Send the quote and the invoice as links the customer can open on a phone, and ask for a deposit on the quote.
Looking for a quick number? Try the paint estimate calculator. Want a form to hand over? Use the painting estimate template.
Sources
Prices and rates change and vary by region. Check the current version of each source.
- Fixr: cost to paint a room, updated January 31, 2025.
- Sherwin-Williams ProMar 200 Zero VOC Interior Latex Flat, product data sheet.
- Sherwin-Williams Emerald Urethane Trim Enamel, product data sheet.
- CompositePaint: how to estimate a paint job. An estimating guide; its production rates are used as starting points only.
- EPA: Renovation, Repair and Painting Program for contractors.
- U.S. Bureau of Labor Statistics: painters, construction and maintenance.