Choosing software

When and how to switch field service software

When to change field service software, where the export is in common tools, what to move, running both for a cycle, and a cutover checklist.

Adrian GluchowskiOwner of Superior Stain Solutions, builder of ChalkLast reviewed 14 min read

On this page

Moving to new software feels risky because it is. A bad switch in the middle of a season can double-text your customers, lose a week of invoices, and leave your crew staring at a blank screen. A good switch is boring: a few quiet evenings, one overlap month, and then the old system is just a folder.

The steps are the same for any move, whether you are leaving a paper book, a spreadsheet or another CRM. This guide covers when to move (and when not to), what to export first and where the export lives in a few common tools, what usually does not come across, why you should run both for a billing cycle, the double-text trap, two worked examples, and a cutover checklist you can copy. If you are still deciding what to move to, start with how to choose a CRM for a service business.

When to switch, and when not to

Good reasons to switch:

  • The tool does not fit how you work, and you work around it every day.
  • The price has grown past the value, especially per-person fees as your crew grows.
  • Your crew will not use it.
  • A feature you need has been missing for a year.
  • Support is slow when you are stuck.
  • You want to own your data and cannot get it out easily.

Bad reasons:

  • A shiny new feature you will not use.
  • A friend said theirs is better, and you have not tried it.
  • Your current one is "annoying" in a way you could fix with an hour of setup.

Bad timing:

  • In the middle of your peak season. The best time to switch is your slowest month, with the most time to learn and the fewest jobs to lose. For many exterior trades that is December to February. The exterior contractor calendar lays out the year month by month.
  • Right before a big job.
  • While your key person is out.

If the switch is forced, because the old tool is shutting down or you are locked out, pick a quiet week and go faster, and use the checklists below.

Export everything first

Before you touch the new system, get everything out of the old one. Do it now, while you still have access, and save the files in a dated folder you will not lose.

What to export, in order of importance:

  1. Customers: names, phones, emails, service addresses, billing addresses, tags, notes and how they were found.
  2. Open quotes and unpaid invoices: who owes what, and for what. This is the list that costs you money if it is lost.
  3. Scheduled visits: a list of everything on the calendar for the next 60 to 90 days, with date, time, address, crew and notes. A printed calendar or a screenshot works if there is no export.
  4. Recurring customers: the schedule for each one: which day, how often, what price, which crew.
  5. Price list: your services and prices.
  6. Job and payment history: at least the last two years, for taxes and for questions. Invoices, payments, and deposits.
  7. Photos and files: download them. These are often not in the data export.
  8. Message history: texts and emails with customers, if you can get them.
  9. Settings: your tax rates, quote terms, invoice wording, checklists. Copy them into a document, because you will need to rebuild them.
  10. Anything that charges on a schedule: list every automatic payment or subscription, who is on it and how often.

Check each file by opening it. A blank or cut-off file is a worse surprise in a month than today. Keep a copy off the old system, in two places.

Where the customer export lives in common tools

Most tools can export the customer list. Fewer can export everything else. Here is where each maker's own help pages say the customer export is. Menus change, so if a step does not match your screen, search that tool's help center for "export".

Moving fromWhere the customer export isWhat you getSource
JobberClients, then More Actions, export clients, and pick CSV. Only admin users can export clients.Jobber emails the file. Up to 1,500 rows per file, so a bigger list arrives as several files.Jobber Help Center
Housecall ProCustomers, then Actions, Export, confirm your email and send the file. Jobs export the same way from Jobs. Admins only.A CSV file by email.Housecall Pro Help Center
QuickBooks OnlineCustomers & leads under Customer Hub, then the Export to Excel icon next to Print. Reports, Customer Contact List lets you pick the columns.An Excel file. Save it as CSV if the new system takes CSV.QuickBooks help
Google ContactsSelect the contacts (or Selection Actions, All), then More actions, Export, Google CSV.A CSV or vCard file.Google Contacts Help
A spreadsheetSave or download it as CSV, with one header row.A CSV file.Your spreadsheet app

All checked November 1, 2026. A customer export is rarely the whole story: ask for quotes, invoices, jobs and photos separately, and see what usually does not move.

What usually does not move

Be ready for a gap, because most systems do not carry everything:

  • Job and visit history. Past jobs are often not importable. Keep the export as an archive.
  • Photos. Usually a separate download.
  • Recurring schedules. The pattern rarely transfers. You will usually have to rebuild each repeating job by hand.
  • Saved cards and bank accounts. For good reason, these do not leave with a spreadsheet. A card number is not a field you can export to a file, and you should never email or paste one. If your old tool and your payment account are separate, there may be a secure way to move them. For example, Stripe will work with you and your previous payment provider on a PCI-compliant transfer of saved payment data, and says many providers require the account owner to request it (see Stripe's data migration guide). That takes days or weeks, so the realistic plan is: ask customers to pay by card again on their next invoice, and the new system saves it.
  • Message threads and notes. Often partial.
  • Custom fields, tags and automations. You will rebuild these.
  • Reports. You will start new ones.

Ask the old vendor, in writing: "What can I export, in what format, and what is not included?" Their answer is your plan.

Run both for one billing cycle

The safest switch is an overlap, not a hard cut.

For about one month (a billing cycle), run the new system for new work and keep the old one for what is already in motion.

  • New quotes and new jobs go in the new system.
  • Jobs that were already scheduled finish in the old system, and are invoiced there.
  • Unpaid invoices are collected in the old one until they are closed.
  • Recurring customers move on a date you pick, one route at a time. Start with the smallest.
  • At the end of the cycle, the old system should be down to a few open items. Close them, export one more time, and stop paying.

The cost is one extra month of fees. That is cheap insurance.

Turn off the old automations

This is the trap that catches the most people. Both systems send reminders, and for one week your customer gets two texts about the same visit. Or the old one keeps sending "your invoice is overdue" for an invoice you already collected.

Before you move a single customer:

  1. List every automatic message in the old tool: appointment reminders, quote follow-ups, invoice reminders, review requests, "on my way" texts, payment receipts, marketing.
  2. Decide which system sends each one during the overlap. Never both.
  3. Turn off the old one, one kind at a time, as the new one takes over. Pause everything if there is a master switch.
  4. Check the new one by sending a test to your own phone.
  5. Look for scheduled sends you forgot: a batch of review requests, a seasonal campaign, a recurring invoice.
  6. Remember opt-outs. If a customer texted STOP to the old number or system, carry that over. Texting someone who opted out is a legal risk. Look at how the old tool recorded it, and keep a list.
  7. Watch the first week for double messages, and ask a few customers if they got two.

If you change your texting number, tell customers once, in a plain note, so they know the new one is you.

Tell your crew and your customers

Crew first. They are the ones using it eight hours a day.

  • Tell them why, in a sentence: "so you see the whole day in one place and we stop getting calls at night."
  • Show them the one screen they need. Not the whole app.
  • Do a 15-minute practice on a pretend job before the first real one.
  • Give a cheat sheet of three steps: see my day, clock in, finish and photos.
  • Name one person to ask when stuck.
  • Expect grumbling for a week. Fix what is slow.

Customers second, and only what they need.

  • If the texting number or sender changes, send one note: "We've updated our systems. You'll see messages from this number now."
  • If they pay differently, tell them with the next invoice.
  • If they have a customer link or portal, let them know the old link will stop working.
  • Do not announce the whole thing. Most customers do not care which software you use. They care that it works.

The first two weeks

Block time. Do not run the new system in the cracks of a busy week.

Days 1 to 3. Import customers. Check 20 at random against the old list. Rebuild the price list. Set your quote terms, invoice wording and tax rates. Send yourself a test quote and a test invoice.

Days 4 to 7. Enter open quotes and unpaid invoices by hand if they did not import. Enter the next two weeks of scheduled visits. Train the crew. Run one real job end to end.

Week 2. Move the next route or the next set of customers. Check every message. Compare totals: what the old system says is owed vs what the new says. They should match.

Always: keep a short list of problems, and fix the top three a day.

Example: a cutover calendar

Example. A two-crew shop with about 1,200 customers and 40 recurring accounts switches in its slow season. The weeks are a sketch; stretch them if you are busier.

WeekWhat happensDone when
1Export everything. Ask the old vendor what is not included. List every automatic message.Every file opens, and is saved in two places
2Import customers and the price list. Rebuild tax rates, terms and templates. Test a quote and an invoice to your own phone.The customer count matches (see the next example)
3New quotes and jobs start in the new system. Old jobs finish in the old one. Train the crew on one practice job.The crew has run one real job end to end
4Move recurring accounts, the smallest route first. Turn off the old reminders for each route as it moves.No double texts reported
5 to 6Collect the last old invoices. Final export. Cancel the old system.Nothing open in the old system

For the crew side of week 3, the crew onboarding checklist has a short list you can reuse.

Example: checking that everything came across

Example. The numbers are made up. Two checks catch most import mistakes.

The customer count. The old system says 1,204 active customers. The export has 1,240 rows, because 36 customers have a second property and get a second row. After the import, the new system should show about 1,204 customers, not 1,240. If it shows 1,240, the second properties came in as copies. If it shows far fewer, rows were skipped. Then pick 20 customers at random and compare name, phone, email and address against the old system.

The money. On the day you start, the old system shows 23 unpaid invoices worth $18,450. You collect them in the old system during the overlap. By week 4, 19 are paid ($15,300), so 4 are still open:

Still owed = $18,450 - $15,300 = $3,150 on 4 invoices

Those 4 are the list you carry. Keep collecting them in the old system, or invoice the balance in the new one and mark the old invoice so nobody chases it twice. Either way, the total owed across both systems should still be $3,150.

A cutover checklist

Copy this.

Before

  • [ ] Picked a slow week, not a rush
  • [ ] Exported customers, open quotes, unpaid invoices, price list, history, photos
  • [ ] Opened each file to check it
  • [ ] Copied settings and terms into a document
  • [ ] Listed every automatic message and recurring payment
  • [ ] Listed scheduled visits for the next 90 days
  • [ ] Listed recurring customers, with day, price and crew
  • [ ] Asked the old vendor what is not included

During

  • [ ] Imported customers, and checked 20 at random
  • [ ] Entered the price list, tax rates, terms and templates
  • [ ] Entered open quotes and unpaid invoices
  • [ ] Entered the next two weeks of visits
  • [ ] Tested messages to my own phone
  • [ ] Turned off the matching old automations
  • [ ] Trained the crew, and ran a practice job
  • [ ] Moved recurring customers one route at a time

After

  • [ ] Compared what is owed in both systems
  • [ ] Collected the old unpaid invoices in the old system
  • [ ] Asked a few customers if they got double texts
  • [ ] Did a final export from the old system
  • [ ] Cancelled the old one only after the last open item closed
  • [ ] Kept the export files for at least the years you need for taxes

How Chalk helps

This part is about our software. Skip it if you only want the checklist.

If the new system is Chalk, here is how the plan above maps onto it, in short:

  • What imports. Clients, a price book and open estimates, from CSV files under Settings > Data. On the clients card, Where is it coming from? has Jobber, Housecall Pro, ServiceTitan, QuickBooks, Google Contacts and Any spreadsheet. The choice only changes how Chalk guesses your columns, and you can match any column by hand. Every import shows a Preview first (how many are new, already exist, or unusable), a big file goes in 500 rows at a time, and nothing is sent to imported clients.

  • A client on two rows, with the same name and the same phone or email, becomes one client with both addresses, not two copies. That is what makes the customer count check above come out right.

  • QuickBooks. Import your QuickBooks customers from the exported file. The QuickBooks Online connection is one way, from Chalk to QuickBooks, so it never brings your QuickBooks data into Chalk. See Connect QuickBooks Online.

  • Running an import twice. The same clients file is safe to run again. A price book row with the same name and unit as an item already in your price book is skipped, so running the same file twice adds nothing new and never changes a price you typed. An open estimate that is already in Chalk exactly as the file has it is skipped. One that changed since comes in again, and the Preview flags it as maybe already in Chalk so you can check it.

  • What you rebuild. Jobs, visits, invoices, payments, notes, photos and recurring schedules do not come in. Book each repeat customer again as a series (Set up recurring visits). Saved cards are saved again the first time a customer pays by card on a Chalk invoice page.

  • STOP replies. Chalk does not learn who texted STOP to the old system. Match those customers' numbers to Home phone or Other phone on import so they come in marked no texts, or leave them out of the file. See Quiet hours, consent and STOP.

  • A quiet start. Only the day-before reminder and On my way are on when you start, and Pause all automations stops every automatic message while you check.

The Chalk steps, from the import to texting and saved cards, are in Switch to Chalk from another CRM. The import itself is in Import your clients and price book, and Export your data covers getting everything back out later.

FAQ

What should I export before switching field service software?

Customers first, then open quotes and unpaid invoices, the next 60 to 90 days of scheduled visits, recurring schedules, your price list, at least two years of job and payment history, and photos. Open each file to check it.

Can I move saved customer cards to new software?

Not with a spreadsheet. A card number cannot go in an export file. Some processors, Stripe among them, will work with your old provider on a secure transfer, which takes days or weeks. Most shops ask customers to pay by card again on their next invoice.

How long should I run the old and new systems side by side?

About one billing cycle, often a month. New quotes and jobs go in the new system, and work already in motion finishes and is invoiced in the old one.

When is the best time to switch?

Your slowest month. For many exterior trades that is December to February. Avoid the middle of peak season, the week before a big job, and any week your key person is out.

How do I keep customers from getting two reminder texts?

List every automatic message in the old tool, decide which system sends each one during the overlap, and turn the old one off as the new one takes over. Send a test to your own phone, then ask a few customers in the first week.

Does Chalk import customers from QuickBooks?

From a file, yes. Export the customer list from QuickBooks, save it as CSV, and pick QuickBooks on Chalk's client import. Chalk's QuickBooks Online connection is one way, from Chalk to QuickBooks, so it does not pull customers in.

Sources