Whether you need a license to paint, wash, clean, mow or fix things depends on where you work and how big the job is. There is no single national answer, and anyone who gives you one is guessing. What you can do is learn the handful of questions that decide it, know which rules apply nationwide, and learn where to check your own state in about an hour.
This is a hub, not a legal guide. It does not list every state's rules, because they change and a wrong answer here could cost you. It tells you what to look up, where, and what insurance a small service contractor usually carries.
How to check your own state
Do this once, in this order:
- Search "[your state] contractor licensing board" and open the official state page (a .gov address). Look for a plain list of who needs a license and any dollar limit on unlicensed work.
- Call or email the board and ask the exact question: "I do [pressure washing / interior painting / mowing] for homeowners. Do I need a license or registration, and is there a job-size limit?" Keep the answer in writing.
- Check your city and county. Many places require a general business license even where the state does not.
- Check your state's other agencies for specific activities, such as pesticide applications (the state department of agriculture or environmental agency) and stormwater (your local stormwater program).
- Ask your insurance agent. They see the requirements in your area every day, and customers often ask for proof of insurance before they ask for a license.
The National Association of State Contractors Licensing Agencies lists its member agencies at nascla.org. The SBA's page, Apply for licenses and permits, explains that most small businesses need some combination of federal, state and local licenses, and that local governments set their own requirements.
Business registration and local licenses
These apply to almost everyone, whatever the trade.
- Register your business with your state (and county or city if required), whether you are a sole proprietor using a trade name or an LLC.
- Get an EIN from the IRS. It is free. You need it to hire, and it keeps your Social Security number off customer paperwork. See Get an EIN.
- A general business license from your city or county, in many places.
- Sales tax registration. Rules for contractors vary a lot by state. Ask your state revenue department or an accountant before your first invoice.
- Open a business bank account so job money stays separate.
Our guide to starting a deck and fence staining business has the same checklist in order.
When a trade license kicks in
States regulate home improvement and construction work in very different ways. Some patterns:
- A dollar threshold. Many states let you work without a contractor license below a certain job value and require one above it. The threshold, what counts as a "job," and whether labor and materials are both included differ from state to state. For example, the North Carolina Licensing Board for General Contractors says on its site that a general contractor license is required for projects valued at $40,000 or more: nclbgc.org. That is one state's rule for one kind of license. Do not assume yours is similar.
- Registration instead of a license. Some states, like Washington, require every construction contractor to register with the state labor department. Its page says registration covers general contractors and specialty contractors: Washington L&I contractor registration.
- Specialty classifications. Some states have separate categories for painting, roofing, electrical, plumbing and so on. South Carolina's contractor board, for instance, regulates several classifications: SC Contractors' Licensing Board.
- Trade-specific licenses. Electrical, plumbing and gas work usually need a license almost everywhere. Painting, cleaning, lawn care and pressure washing may or may not need a trade license depending on the state, and they may fall under a general home improvement rule. Ask.
- A handyman exception. Some states let handymen do small jobs without a contractor license up to a set limit. Limits and the types of work covered vary widely. Ask the board before you take a bigger job.
- Working without a license you need can bring fines and other penalties, and in some places it can limit your right to collect payment in court. Check before the first job.
If you are unlicensed and the job is above your state's limit, do not take it. Refer it or get licensed.
Lead-safe work on pre-1978 homes (EPA RRP)
This one is federal and applies in every state.
The EPA's Renovation, Repair and Painting Rule says anyone paid to disturb painted surfaces in homes and child-occupied buildings built before 1978 must be certified in lead-safe work practices. The EPA states that this applies to all firms, even sole proprietorships, and it includes painters, plumbers, electricians and property managers. Homeowners working on their own home are generally not covered.
What it means in practice:
- If you sand, scrape, strip or demolish painted surfaces on a pre-1978 home, you need an EPA (or state) certified firm and a certified renovator.
- Workers who are not certified must be trained by a certified renovator.
- You must follow lead-safe work practices, such as containing the work area, minimizing dust, and cleaning up and checking the cleanup (cleaning verification).
- Fifteen states run their own programs: Alabama, Delaware, Georgia, Iowa, Kansas, Massachusetts, Mississippi, North Carolina, Oklahoma, Oregon, Rhode Island, Utah, Vermont, Washington and Wisconsin. In the rest, the EPA runs it.
- Most staining on bare or stained wood does not involve painted surfaces, but painted fences, porches and trim on older homes do.
Start at the EPA's Renovation, Repair and Painting Program. Training is offered by EPA-accredited providers, and firms apply to the EPA or the state.
Wash water and runoff
If you pressure wash, soft wash, clean gutters or strip and brighten decks, the water has to go somewhere.
- Storm drains usually lead straight to streams, not to a treatment plant. Local rules in many cities and counties prohibit wash water, even with no soap, from entering storm drains, gutters or ditches. The details differ by place.
- Common practices that stormwater programs recommend: sweep and vacuum debris first, find the storm drains on every job, protect inlets with mats or barriers, use less water and gentler chemicals, and collect and dispose of wastewater where local rules allow, which is often the sanitary sewer rather than the street.
- Chemicals matter. Follow each product's label and safety data sheet, protect plants, and do not let concentrated cleaner reach a drain or a waterway.
- Pre-1978 buildings add lead rules to the above.
Penalties vary widely. Contact your local stormwater or wastewater program, usually part of the city or county public works department, and ask what applies. The EPA's page on the stormwater program explains the federal framework.
Lawn and landscape crews have a related rule: applying pesticides, including some weed killers, is regulated by your state's pesticide agency, usually the department of agriculture. Federal law requires certification for restricted-use products, and each state runs its own program. Ask your state agency whether the products you use need a commercial applicator license.
Insurance: GL, workers' comp, auto, tools
Customers, property managers and HOAs will often ask for proof of insurance before they ask for a license. These are the usual coverages for a small service contractor. Costs vary by trade, state, payroll and claims history, so get quotes from a licensed agent instead of relying on a number you read online.
| Coverage | What it covers | Notes |
|---|---|---|
| General liability (GL) | Damage you cause to someone else's property, and injuries to other people | The one customers ask for. Overspray on a neighbor's car, a flooded room, a slip and fall. |
| Workers' compensation | Medical bills and lost pay for your employees hurt on the job | Most states require it once you have employees. The employee count that triggers it varies, and some states require it from the first hire. |
| Commercial auto | Vehicles used for business | A personal auto policy may not cover a truck or trailer used for work. Ask. |
| Tools and equipment | Gear stolen from a truck or trailer | Often forgotten until the first theft. |
| Commercial property or inland marine | Equipment, materials and stored inventory | Depends on what you own. |
| Pollution or chemical coverage | Cleanup after a chemical spill or runoff | Some trades, like pressure washing and lawn care, may need an endorsement. Ask your agent. |
| A bond | Protection for customers if you do not finish or follow the rules | Some states and some cleaning customers require one. Ask. |
The SBA's business insurance page describes the main types, and notes that businesses with employees are generally required to carry workers' compensation, with requirements varying by state.
Ask about care, custody or control. Many general liability policies do not cover damage to the part of the property you are working on, or to customer property in your care, unless you buy extra cover. See when you damage a customer's property for what to ask your agent.
If you use subcontractors, ask your insurer how they affect your premium, and require a certificate of insurance from each sub. See hiring your first helper.
Certificates of insurance
A certificate of insurance (COI) is a one-page document your agent issues that proves you have coverage. It is proof, not the policy.
- Who asks: property managers, HOAs, commercial customers, general contractors, and some homeowners.
- What it shows: your insurer, policy number, coverage types and limits, and dates.
- "Additional insured". A customer may ask to be listed so they are covered under your liability policy for your work. Your agent adds this.
- Keep it current. Check expiration dates and send a new certificate when you renew.
- Ask for one from your subs. Verify the policy dates, and call the agent if you are unsure.
- A COI does not mean the job is covered for every claim. Exclusions and limits still apply.
Ask your agent for a COI template so you can send one in a day.
Checklist by trade
A starting point. Replace "check" with the answer from your own state and city.
| Trade | Business license and registration | Trade license | Other federal or environmental rules | Insurance usually carried |
|---|---|---|---|---|
| Painting (interior, exterior) | Yes | Check state and job size | EPA RRP on pre-1978 homes | GL, workers' comp with employees, auto, tools |
| Deck and fence staining | Yes | Check state and job size | RRP on painted surfaces, wash water, chemical use | GL, workers' comp, auto, tools |
| Pressure washing and soft washing | Yes | Check | Wash water and runoff, chemical handling | GL, workers' comp, auto, equipment, maybe pollution |
| Cleaning (house and commercial) | Yes | Check | Chemical handling | GL, workers' comp, auto, bonding for some clients |
| Lawn and landscape | Yes | Check; some states license landscape or irrigation | Pesticide applicator rules, local noise rules | GL, workers' comp, commercial auto, equipment |
| Handyman | Yes | Check the small job limit | RRP when disturbing paint in pre-1978 homes | GL, workers' comp with employees, auto, tools |
| Gutter and window cleaning | Yes | Check | Fall safety | GL, workers' comp with employees; ask about work at height |
| Holiday lighting | Yes | Check | Fall safety | GL, workers' comp, auto; ask about roof work |
Take this to your insurance agent and your state board and ask them to mark what is missing.
State contractor boards, to start your search
A few official sites, as examples of what to look for. Look up your own state first, and use NASCLA to find every state's agency.
| State | Where to start |
|---|---|
| California | Contractors State License Board |
| North Carolina | Licensing Board for General Contractors |
| South Carolina | Contractors' Licensing Board |
| Washington | Labor & Industries, contractor registration |
| Any state | NASCLA, state contractor licensing agencies |
If your state is not listed, search "[state] contractor licensing board" or ask your local Small Business Development Center, a network the SBA supports.
What to do next
- Look up your state board, call, and get the answer in writing.
- Register your business and get your EIN.
- Get a quote for general liability, and ask about everything else on the insurance list.
- If you work on homes built before 1978, get RRP certified.
- If you wash or clean, write down your wash water plan.
- Make a folder with your license, registration, insurance certificate and EIN letter, and keep it where you can send it from your phone.
Sources
- U.S. Small Business Administration, Apply for licenses and permits and Get business insurance
- U.S. EPA, Renovation, Repair and Painting Program and NPDES stormwater program
- IRS, Get an Employer Identification Number
- NASCLA, nascla.org; California CSLB; North Carolina Licensing Board for General Contractors; South Carolina Contractors' Licensing Board; Washington L&I
- The wash water and pesticide notes are general summaries. Your local stormwater program and your state pesticide agency are the authority.