Mowing prices look like they come from lot size, but the time comes from the mower, the trimming and the drive. A big, open lot on a zero-turn can take less time than a small, cluttered yard with a push mower. This calculator works out the time from the mower and the property, adds the trimming and the drive, and prices the visit at your margin. Then it turns one cut into a season.
How the calculator works
- Mowable area. The lot size times the share that is actually grass you mow. The house, drive, beds, pool and woods are not.
- Mower speed. The standard way to work out how much ground a machine covers is deck width times ground speed times the share of time it is actually cutting, divided by 8.25. That divisor is the number of square feet in an acre (43,560) divided by the feet in a mile (5,280). The result is acres an hour. Pick a mower to fill in a typical width and speed, or enter your own.
- Mowing time. The mowable acres divided by the mower's acres an hour.
- The rest of the visit. Trimming, edging and blowing off hard surfaces, and the drive to this property. Both are on the clock.
- Hours and cost. The visit's hours round to the nearest tenth. Each hour costs your labor plus your fuel and equipment.
- Price. The cost divided by one minus overhead and margin. If the cut is under your minimum, the price is the minimum.
- The season. The price per cut times the cuts in the season, and the season split evenly across its months for a flat monthly bill.
The formula
- Acres an hour =
deck width in feet x mph x time cutting / 8.25 - Mowing hours =
mowable sq ft / 43,560 / acres an hour - Hours =
mowing + trimming + drive, rounded to a tenth - Price per cut =
hours x (labor + equipment per hour) / (1 - overhead% - margin%), or your minimum if that is higher - Season =
price per cut x cuts. Monthly bill =season / months, rounded up to the cent
Worked example
The calculator opens on a 20,000 sq ft lot (about 0.46 acre) where 75% is grass, cut with a 36 inch walk-behind at 3.5 mph. The mower is cutting 70% of the time. Trimming takes 15 minutes and the drive 10. Labor costs $25 an hour and fuel and equipment $8. Overhead is 15% and the margin is 25%. The season is 28 cuts over 7 months.
- Mowable area: 20,000 x 0.75 = 15,000 sq ft.
- Mower speed: (36 / 12) x 3.5 x 0.70 / 8.25 = 0.89 acres an hour.
- Mowing: 15,000 / 43,560 = 0.344 acres, divided by 0.89 is 0.39 hours, about 23 minutes.
- Hours: 23 minutes mowing + 15 trimming + 10 driving = 48 minutes, which is 0.80 hours.
- Cost: 0.8 x ($25 + $8) = $26.40.
- Price per cut: $26.40 / (1 - 0.15 - 0.25) = $44.00. Overhead is 15% of that ($6.60), so the cut costs you $33.00 and leaves $11.00, exactly 25%.
- Season: 28 x $44 = $1,232, or a flat $176.00 a month over 7 months.
- As a check, that is $2.93 per 1,000 sq ft mowed.
The mower changes the price. The same one-acre lot (90% grass, 20 minutes of trimming, same hourly cost) with different machines:
| Mower | Acres an hour | Mowing | Hours | Price per cut |
|---|---|---|---|---|
| Walk-behind, 21 in at 3 mph | 0.45 | 121 min | 2.5 | $137.51 |
| Walk-behind, 36 in at 3.5 mph | 0.89 | 61 min | 1.5 | $82.51 |
| Stand-on, 48 in at 6 mph | 2.04 | 27 min | 0.9 | $49.51 |
| Zero-turn, 60 in at 7 mph | 2.97 | 18 min | 0.8 | $44.00 |
Once the mowing is fast, the trimming and the drive set the price. Bigger machines also cost more to run, so put your own fuel and equipment cost per hour in for each one.
How lot size changes it. A 36 inch walk-behind on lots that are 80% grass: a quarter acre works out to $33.00, so the $35 minimum applies. A half acre is $49.51, one acre is $71.51 and two acres is $121.00. The price grows with the lot, but slower than the lot does, because the drive and trimming do not.
Pricing tips
- Price from time, check with area. Per-square-foot and per-acre prices are good sanity checks, not good starting points. Two lots of the same size can take very different time.
- Price the first cut separately. Tall grass takes longer and can clog a deck. Price it as a first visit, then drop to the maintenance price.
- Bill a flat monthly amount if you can. The season split evenly smooths the customer's bill and your income through the weeks when growth slows or the rain skips a cut. Make it clear in writing how skipped weeks and extra cuts are handled. The tradeoffs of monthly and per-visit billing are in maintenance plans for service businesses.
- Charge for what is not mowing. Leaf cleanup, edging a long driveway, bagging, trimming along fences and hedge work are separate lines at your hourly rate.
- Set a minimum. Small lots are where the drive eats the margin.
- Build routes. Drive time is the cheapest margin to find. Grouping stops on the same streets can save more than a price rise.
- Plan for the weather. Rain moves cuts. Have a rule in the agreement for catch-up cuts so a wet week does not mean unpaid work.
- Count the season honestly. The cuts per season depend on where you are and the weather. Use your own count from last year rather than the default.
Put the season in writing with the lawn care service agreement template, and see how many lawns a crew can carry with the crew capacity calculator.
If you run mowing visits through Chalk, you can book a repeating run of visits on a job (every week or every 2 weeks, for a set number of visits, until a date, or until you stop it) and choose whether each completed visit drafts or sends an invoice for a per-visit amount. When weather takes a day, Rain day moves that day's work visits in one go.
Common mistakes
- Pricing by lot size alone. Obstacles, slopes, gates and fences decide the time more than the size does.
- Leaving out the drive. The drive to the property is on the clock. Count it, or cover it with a minimum.
- Forgetting the equipment. Fuel, blades, oil, repairs and replacing the mower are costs. They go in the hourly cost.
- Using the mower's top speed. The number on the brochure is ground speed, not mowing speed. The time cutting percentage is where the turns, overlaps and obstacles are.
- No weather plan. If a rained-out week is just lost, your season price is wrong.
FAQ
How much should I charge to mow a lawn?
It depends on your costs, your mower and the property, so work it out. Enter the lot, the mower and your hourly costs, and the calculator gives a price at your margin. Compare it with what you charge now before you copy anyone else's price.
How much should I charge to mow an acre?
The same acre can cost $44 or $138 a cut depending on the mower and the trimming. The table above shows how much the mower matters. Run your own mower through the calculator.
Should I charge by the square foot, the acre or the hour?
Work out the time first. Then quote whichever the customer prefers: a flat price per cut is simplest for most homeowners. Per-acre pricing is common for large, open properties where time and area move together.
What is a good minimum for a mowing visit?
One that covers your drive, your trimming and your margin on the smallest lot you will take. Put a small lot through the calculator and set the minimum at the price it gives.
Should I price per cut or per month?
Both. Work out the price per cut, then offer a flat monthly bill for the season. The calculator shows both. A flat bill is easier for customers to budget and more stable for you, but spell out in the agreement what happens in a drought or a rain week.
How many cuts are in a season?
It depends on your area, your grass and the weather. The default of 28 cuts over 7 months is only an example. Use last year's count.
Does the calculator include sales tax?
No. Whether lawn care is taxable depends on your state and sometimes your city. Ask your state revenue department or your accountant.
Sources
- Iowa State University Extension, Estimating field capacity of farm machines (PM 696): how to estimate the field capacity of farm machinery, and field efficiency, the share of time a machine does useful work. Width x speed x efficiency / 8.25 is the standard form of that estimate in acres an hour.
- The 8.25 is 43,560 square feet per acre divided by 5,280 feet per mile.
- Mower presets (widths and speeds), time cutting, trimming minutes, drive time and cuts per season: typical starting points, not published figures. Adjust them to your equipment, your market and your climate.