How you pay your crew shapes how they work. Pay by the hour and nobody is rushed. Pay by the day and the crew goes home when the work is done. Pay by the piece and speed rises, along with the risk of sloppy work. Pay a share of profit and the crew starts caring about waste and callbacks.
The same plans work for lawn crews and cleaning teams, where the pay is often an hourly rate or a day rate per person. No plan is best for every shop. This guide lines up the four common ways to pay side by side, works one crew member's week through each, and explains the part many owners get wrong: day rates and piece rates do not turn off overtime.
Four ways to pay, side by side
| Hourly | Day rate | Piece rate | Hourly plus bonus or profit share | |
|---|---|---|---|---|
| What it pays for | Time on the clock | Showing up and finishing the day | Finished units (square feet, linear feet, rooms) | Time, plus how the job turns out |
| What it rewards | Showing up, being careful | Finishing early, going home on time | Speed | Speed that does not cause rework |
| Risk to you | Slow work costs you more | Long days cost you extra overtime | Rushed, sloppy work and callbacks | A bad job pays nothing extra, which can sting |
| Risk to the worker | Rain days pay nothing | A short or rained-out day can pay nothing | A slow day pays little | Bonus not paid if the job loses money |
| Good for | Helpers, new hires, varied work | Experienced techs on steady crews | Repetitive, easy-to-measure work | Leads and crews you want to think like owners |
| Overtime | Over 40 hours a week at one and a half times the pay rate | Still owed, based on a rate worked out from the week | Still owed, based on a rate worked out from the week | Bonus counts in the overtime rate |
One crew, one week, four pay plans
Ray is an employee on a fence staining crew. In one week he works five days and 46 hours. He stains 1,700 sq ft of fence and finishes the job within the hours you budgeted.
All overtime figures below use the federal rule: every hour over 40 in the workweek is paid at least one and a half times the regular rate.
Plan 1: hourly at $25
40 hours x $25 = $1,000.00
6 overtime hours x $37.50 = $225.00
Total = $1,225.00
Effective rate: $1,225 / 46 = $26.63 an hour
Plan 2: day rate of $220
Five days at $220 is $1,100. That is not the end of the math. For a day-rate worker, the federal rule says to add up the day-rate pay for the week, divide by the hours actually worked to get the regular rate, and pay an extra half of that rate for each hour over 40.
Regular rate = $1,100 / 46 hours = $23.91
Half-time premium = 0.5 x $23.91 x 6 hours = $71.74
Total = $1,100.00 + $71.74 = $1,171.74
Effective rate: $1,171.74 / 46 = $25.47 an hour
The day rate already pays for all 46 hours at straight time, so only the extra half is owed on the 6 overtime hours.
Plan 3: piece rate of $0.65 per square foot
1,700 sq ft at $0.65 is $1,105.
Regular rate = $1,105 / 46 = $24.02
Half-time premium = 0.5 x $24.02 x 6 = $72.07
Total = $1,105.00 + $72.07 = $1,177.07
Effective rate: $1,177.07 / 46 = $25.59 an hour
Plan 4: hourly at $22 plus a $100 bonus for finishing within the hours budget
A bonus you promise in advance with a formula is part of the pay used for overtime.
Straight-time pay = 46 x $22 = $1,012
Bonus = $100
Regular rate = ($1,012 + $100) / 46 = $24.17
Half-time premium = 0.5 x $24.17 x 6 = $72.52
Total = $1,012 + $100 + $72.52 = $1,184.52
Effective rate: $1,184.52 / 46 = $25.75 an hour
The week side by side
| Plan | Total pay | Per hour worked |
|---|---|---|
| 1. Hourly at $25 | $1,225.00 | $26.63 |
| 2. Day rate $220 | $1,171.74 | $25.47 |
| 3. Piece rate $0.65 per sq ft | $1,177.07 | $25.59 |
| 4. Hourly $22 plus $100 bonus | $1,184.52 | $25.75 |
The totals are close on purpose, because the plans were set to pay about the same for a normal week. What differs is what happens when the week is not normal.
When the week changes
| Week | Plan 1 hourly | Plan 2 day rate | Plan 3 piece rate |
|---|---|---|---|
| Rain wipes out Wednesday: 4 days, 35 hours, 1,300 sq ft | 35 x $25 = $875.00 | 4 x $220 = $880.00 | 1,300 x $0.65 = $845.00 |
| Crew finishes faster: 5 days, 40 hours, 1,550 sq ft | $1,000.00 | $1,100.00 | $1,007.50 |
Under hourly, a faster crew earns the same per hour and finishes sooner, so you pay less labor for the same work. Under a day rate, the pay is the same however long the day runs, which rewards finishing early and going home, and costs you overtime when days run long. Under piece rate, speed earns more, so you must inspect the work.
None of the plans is wrong. Pick the one whose incentives match the work you want.
Overtime on day rate and piece rate
The most common mistake is assuming a day rate or piece rate covers all hours. For most workers it does not. In general:
- Overtime is owed to non-exempt employees for hours over 40 in a workweek, at one and a half times their regular rate. See the Department of Labor's overtime page.
- Day rates. The regular rate is the total day-rate pay for the week divided by the hours worked, and the extra half-time is owed on hours over 40. This is 29 CFR 778.112.
- Piece rates. The regular rate is total earnings for the week (including bonuses) divided by the hours worked, plus half that rate for each hour over 40. This is 29 CFR 778.111.
- Bonuses you promise ahead of time (like a profit share formula) are included in the regular rate. See our profit share guide for that math.
- Pay per hour worked can never fall below the minimum wage. A rained-out half day on a day rate, or a slow day on piece work, still has to clear it.
- A day rate does not make someone exempt. Whether a worker is exempt depends on duties and pay level, and most crew members are not exempt.
- Some states add their own rules, such as overtime by the day, or a higher minimum wage. Check your state labor office. The DOL keeps a directory of state labor offices.
Tell your payroll provider how each person is paid and keep time records for every worker, even those on a day rate. The records are what protect you.
What painters and helpers earn
For market data, use the Bureau of Labor Statistics rather than a random blog. The BLS reports that construction and maintenance painters had a median wage of $23.75 an hour ($49,400 a year) in May 2025. The lowest-paid tenth earned under $37,440 a year, and the highest-paid tenth earned more than $78,810. See the Occupational Outlook Handbook entry for painters.
Treat it as context, not a target. Wages vary a lot by region, and these figures cover all painters, from helpers to lead painters across the country. For helper and apprentice wages in your area, the BLS Occupational Employment and Wage Statistics tables give figures by occupation and state: see the BLS OEWS page.
Then compare to the loaded cost. A $22 an hour employee costs about $30.91 for each hour you can bill, as our hourly rate guide works out. Your pay plan is only one part of what a person costs you.
Base pay plus a bonus
Most shops that want the benefits of both settle on this: a fair base pay (hourly or day rate) set near market, plus a bonus tied to something the crew controls.
Good bonus triggers:
- Finishing within the hours budget (as in Plan 4)
- No callbacks within 60 days
- A share of job profit after materials, labor and overhead. See profit share for crews.
- A production target that is easy to measure, like square feet per hour, with a quality check
Write the rule down, pay it on schedule, and never change a bonus after a job has started. A bonus that moves around is just a tax on trust. For what keeps people past one season, see how to keep good crew members, and for lead pay see making someone a crew lead.
Paying subs instead
Some owners pay a helper per job instead of putting them on payroll. That is a different relationship. Whether someone is an employee or an independent contractor depends on the facts, not on what you call them or how you pay them. Read hiring your first helper before you pay anyone as a 1099 subcontractor.
Tracking it
Whatever you pick, keep three records for every job: hours worked per person, what they were paid, and what the job made. Without them you cannot tell whether a plan is working.
- Clock in and out for every worker, including day rate and piece rate workers.
- Review each job: hours against estimate, materials against estimate, and profit.
- Check once a quarter whether your best crew is earning what they could elsewhere. Losing a good lead painter costs more than a raise.
How Chalk helps
This part is about our software. Skip it if you only want the advice.
- Pay types. Under Pay > Pay setup, owners and admins set how each person is paid: by the hour, by the day, or by the job, plus sales pay and commission. Pay per square foot, linear foot or item can sit on the price book as Crew pay per unit. See set up crew pay and record what you paid.
- Day rate rules. A day counts once a person's paid time that day passes half an hour, and the day rate is shared across that day's jobs by time worked. Breaks are not paid.
- Profit share. On a job, Pay someone from this job offers a flat amount, a percent of the job or a percent of the profit.
- Time clock. The crew clocks in and out on their phone. See clock in, track hours and fix timesheets.
- Crew see their own pay. My pay and hours shows each person what they are owed, what is in progress and what has been paid. See my pay and hours.
- What it does not do. Chalk records pay and what you owe. It does not run payroll, withhold taxes or send money. You pay people the way you do now and mark it paid in Chalk.
The free crew pay and profit share calculator splits a job's profit before you commit to a plan.
Sources
- U.S. Department of Labor, Wage and Hour Division, Overtime pay
- 29 CFR 778.112, Day rates and job rates, and 778.111, Pieceworkers
- U.S. Department of Labor, State labor offices
- U.S. Bureau of Labor Statistics, Painters, construction and maintenance (May 2025 median pay)
- The worked pay examples use made-up rates. The $22 an hour employee cost comes from our hourly rate guide.