Closing the sale

How to present an estimate so it gets approved

Present your estimate in person or by text so customers say yes: walk the scope, show options, explain the price, ask for the deposit, and get it signed.

Adrian GluchowskiOwner of Superior Stain Solutions, builder of ChalkLast reviewed 10 min read

On this page

Many contractors do the hard part, driving out, measuring and pricing, and then lose the job at the last step: they email a PDF and wait. The customer reads a page of line items alone at night, has no one to ask, and puts it in the "later" pile.

This guide is about that last step. It shows how to present an estimate in person or by text, what a good estimate contains, how to explain the price, how to ask for the decision and the deposit without feeling pushy, and what to do when the answer is "let me think about it."

Present it, don't just send it

In most contractors' experience, a quote that arrives with a person attached closes better than one that arrives alone. I have no study for that, so test it on your own jobs. You do not have to be a salesman. You are a professional explaining what you will do and what it costs, and the customer has a chance to ask questions while you are there.

There are three ways, roughly from strongest to weakest:

  1. In person, at the visit or a second meeting. You and the customer, with the quote on a phone or tablet. Best for jobs over a few hundred dollars.
  2. On a short phone call, with the quote open. Send the quote first, then call and walk through it. Good when you did the visit but the other spouse was not there.
  3. By text, with a short video or voice note. For small, repeat or photo-quoted jobs. See below.

The worst way is to send the quote and hope. If you must send it, send it with a message and a follow-up. See How to follow up on estimates.

What a winning estimate shows

A buyer is trying to answer four questions: What exactly am I getting? What does it cost? When will it happen? What if something goes wrong? Write the estimate so each answer takes seconds to find.

IncludeWhy it matters
Their name and the job addressShows it is for them.
The scope in plain words"Power wash, sand, and apply two coats of oil-based semi-transparent stain to the deck floor and stairs." Not "deck restoration."
What is not included"Rotted boards are replaced at $X each if found." Surprises cause arguments.
Product and brandPeople like to know what goes on their house.
Prep and number of coatsThis is what separates a $900 job from a $1,800 one.
Timeline"Start the week of May 12, two days on site."
The priceOne total, with optional extras separate.
Payment terms and depositSay when and how much.
Your warranty or guarantee, in writingIf you stand behind it, say it.
When the price expiresA real date.
Your license and insurance, where requiredMany customers ask.
A few photosOf the area, and of finished work like it.

Itemize when the customer is comparing you to others, or when materials are a large share. Use one lump sum when the price is mostly labor and an itemized list would just invite haggling over each line. In both cases, the scope text above the price should say what is included.

Walk the scope in plain words

When you present, talk through the work in the order the customer would experience it. Use their words from the visit.

A structure that takes about ten minutes:

  1. Repeat what they told you. "You said the deck has gone gray, the rail is peeling and you want it done before your daughter's graduation party on June 6th."
  2. Tell them what you found. "The floor boards are in good shape. Three boards by the steps are soft and should be replaced. The rail needs sanding before it takes stain."
  3. Walk through the work. "Day one, we wash and let it dry. Day two, we sand the rail, repair what needs repair, and stain. You will have a dry deck by the weekend."
  4. Say what you'll leave behind. "We cover your plants, move the furniture back and clean up. You'll get photos when we finish."
  5. Show the price. (Next sections.)
  6. Ask for the decision. (Below.)

Use plain words. If you say "we'll back-brush it," say what that does: "we brush the stain into the wood after spraying so it lasts."

Mention the one thing you do that others skip. If your prep is more thorough than the cheaper bids, show it with a photo. It is the reason your price is higher.

Options without confusion

Options help customers feel in control, and they help you sell more without discounting. The risk is too many. Two or three is plenty. For how to price tiers, see Good, better, best pricing.

A worked example, a deck staining job:

What is includedPrice
Base jobWash, prep, two coats on the deck floor and stairs$2,400
Optional: railingsSand and stain the rails and balusters$650
Optional: sealing visit next springOne light cleaning and a refresh coat$350

If the customer takes the base and the railings, the total is $2,400 + $650 = $3,050. With all three, $3,400. A 30% deposit on $3,050 is $915.

How to present them:

  • Lead with the base job and its price. Then say: "Most people add the railings, because it's the same crew on the same day and it costs less than coming back." Say it only when it's true.
  • Mark the one you recommend, and say why in one sentence.
  • Keep the language the same across options so they are easy to compare.
  • Let the customer choose out loud. "Do you want the railings in?" is a smaller decision than "do you want to go ahead?"

Do not offer options you do not want to do. Every option on the page is a promise.

Saying the price out loud

Most people stumble here. They say the price, then apologize, then explain, then discount in their own head before the customer reacts.

Say it once, plainly, tied to the scope:

For everything we just went over, the total is three thousand fifty dollars.

Then stop talking. Count to five. The customer is doing math, checking with a spouse in their head, and comparing to a number they had. Silence is not rejection. Let them think.

Things to avoid:

  • "It's only..." or "I know it's a lot, but..." Both tell the customer to expect to be upset.
  • Justifying before they ask. If they say nothing, don't fill the silence with excuses.
  • Rounding down in your head. If your price is $3,050, say "three thousand fifty," not "around three."
  • A price that depends on the mood. If your price changes by who is asking, they will notice.

If they flinch, ask before you answer. See What to say when a customer says your price is too high.

Ask for the decision and the deposit

Many estimates are lost because no one asked. The customer did not know what to do next, so they did nothing.

Make the next step obvious and easy:

If you'd like to go ahead, I can put you on the calendar for the week of May 12. There's a deposit of $915 to hold the date, and it comes off the final bill. Want me to send you the approval link now?

Notice what that does: it names a date, names the deposit and what it is for, and offers a single action. If they say yes, send the quote right then, with the customer sitting there, and let them approve on their phone. For deposit wording and the state rules that limit deposits, see Deposits for contractors.

A plain close that does not feel pushy:

  • "Does this look like what you had in mind?"
  • "Is there anything you'd change before I can put you on the schedule?"
  • "Which date works better, the 12th or the 19th?"

If a spouse or partner is not at the meeting, offer a way to include them: "Would it help if I sent this to both of you and we do a five-minute call tonight?"

When they want to think about it

"Let me think about it" is not a no. It is also not a yes. Find out what they are thinking about.

Of course. So I can help, is there something about the price, the timing, or the work itself that you want to think through?

The answer tells you what to do:

They sayWhat it usually meansWhat to do
"The price"They have a number in mind, or another bid.Ask what they were expecting. Offer to adjust scope. See the price guide.
"Timing"They are not ready, or you can't start soon.Offer a date later, and hold it.
"I need to talk to my husband/wife"A real second decision-maker.Offer to send the quote to both and call tomorrow.
"Another contractor"They are comparing.Ask what the other bid includes. Don't trash them.
Nothing specificThey don't know.Offer a day to circle back.

Before you leave, set the next touch together:

No pressure at all. Can I check in with you Thursday afternoon? If you've decided before then, the link is in your text.

That turns "I'll let you know" into "Sam will call Thursday," which is much more likely to produce an answer. Then follow the plan in How to follow up on estimates.

If the answer is still no, find out why. See why you lose estimates.

Sending it by text so it still sells

When you cannot present in person, a quote by text is fine. It needs more help from the message.

The message that goes with the link:

Hi Dana, here's your estimate for staining the deck: [link]. In short: wash, prep and two coats on the deck and stairs for $2,400. You can tick the railings for $650 more, which I recommend since we're already there. The price is good through May 3rd, and I can start the week of May 12. Happy to walk you through it on a quick call. When's a good time today?

That message does four things: it names the job, gives the main number, says what is optional and recommended, and offers to talk.

Also helpful:

  • A 60-second video of you at their deck, saying what you found. Phone video is fine.
  • Photos on the estimate of the areas you will work on.
  • A real expiry date, so there's a reason to decide.
  • A call within a few hours. "Hi Dana, did the estimate come through okay?"

How Chalk helps

This part is about our software. Skip it if you only want the sales advice.

  • Optional extras. Press + Optional extra on the quote, or tick Optional, customer decides on a line. The customer ticks what they want and the total updates. Tick We recommend it to show a "We recommend this" badge. See Optional extras, timed offers and quote expiry.
  • Not side-by-side tiers. Chalk does not put two or three complete versions of a job next to each other on one quote. Use optional extras for add-ons, or press Duplicate and send a second quote for the other version.
  • A deposit on the quote. Set Deposit to collect as dollars or a percent. When the customer approves, they pick how to pay it (card, bank transfer, check or cash). Card and bank open the payment page right away. See Take a deposit.
  • Approval on the phone, in the room. The customer opens the link, types their name, can draw a signature and presses Approve. If someone says yes in person, press Mark approved and hand them the screen to sign, or approve without a signature. See How a customer approves and signs a quote.
  • Photos on the quote. Attachments shows photos of this job, and Work showcase shows finished work like it under "Our work on jobs like yours". See Job photos and the Gallery.
  • A real expiry date. The customer's page says "This estimate is good through" the date. After it passes, they cannot approve until you send it again.
  • A timed offer takes money off if they approve before a clock runs out. It costs you real margin, so check the math first (see How to follow up on estimates).
  • Follow-up on a schedule. Quote follow-ups are automations you add under Settings > Automations. They are off until you add them. See Send a quote and get it approved.

Sources

  • The presentation structure, the scripts and the example numbers are the author's working method, not a study. Replace the example prices with your own.