"Quality depends on who is on the truck" is the sentence behind most owner burnout. When the work is done well only when you are there, you cannot take a day off, cannot hire easily and cannot grow without lowering your standard.
An SOP (standard operating procedure) is the fix. It is a short, written way of doing one task, so that anyone trained can do it the same way. It is not a binder. It is not a corporate thing. Done right, it is one page per task, with photos, in the crew's language.
This guide shows what to write first, a one-page format you can copy, five SOPs for common trade tasks, how to get the crew to use them, and a free template at the end.
Start with what goes wrong most
Do not try to write everything. Look at the last season and make a list:
- What did customers complain about?
- What did you redo?
- What did the new hire get wrong?
- What do you always remind the crew about?
- What do you do the same way every time, in your head?
Pick the three that cost you the most. Write those first. If callbacks are your biggest cost, start with the task that causes them. If damage is the issue, write the setup and protection step. If new hires fail the same way, write that.
A rule of thumb: an SOP is worth writing if the task happens at least weekly, a mistake costs real money or trust, and more than one person does it.
The one-page SOP format
Every SOP uses the same format, so crew learn to read them once. Keep it to a single page, because a page gets read and a binder does not.
SOP: [Task name]
Owner: [who keeps this up to date] Updated: [date]
WHY IT MATTERS (one line)
[The cost of getting it wrong.]
WHEN
[When you do this, and who does it.]
TOOLS AND MATERIALS
[Short list.]
STEPS (8 to 12, in order, one action each)
1.
2.
3.
DONE LOOKS LIKE (the standard, in plain words, with a photo)
[What the customer would see.]
PHOTOS TO TAKE
[Before, during, after.]
STOP AND CALL IF
[The two or three things that need the office.]
Why these parts:
- Why it matters gives people a reason, which is the best reminder.
- Done looks like is the most important part. It turns "do it right" into something you can check.
- Stop and call if tells the crew where their authority ends, so they do not guess.
Checklists vs manuals
You have two tools, and they do different jobs.
| Checklist | SOP | |
|---|---|---|
| Length | 6 to 12 lines | One page |
| Job | Makes sure nothing is skipped | Shows how to do the thing |
| Best for | People who already know the task | Training and standards |
| Where it lives | On the job, on the phone | In a folder, with photos |
The usual mistake is to write a manual and expect it to work as a checklist. People will not read a page in the driveway. Write the SOP once for training, then boil it down to a short checklist for use on the job. The checklist points back to the SOP.
Five SOPs every crew needs
Five examples from common trades. Take what fits, change what does not.
1. House wash (soft wash)
- Why it matters: Chemicals can damage plants, finishes and metal, and a missed pass leaves streaks.
- When: Every house wash. Lead assigns tasks.
- Tools: Pump and hose, chemical mix per your written mix sheet, brushes, ladder, tarps, plant protection, gloves, eye protection, respirator if required.
- Steps:
- Walk the property with the customer. Photograph existing damage, stains, cracks and loose parts.
- Close windows and doors. Cover or move outlets, lights, fragile items and anything the customer asked about.
- Wet down plants, lawns and anything nearby. Cover small plants.
- Check the mix against the mix sheet. Write what you used on the work order.
- Apply to the siding at low pressure, working in sections. Keep the mix off glass and metal when you can.
- Let it dwell for the time on the sheet, and do not let it dry on the surface.
- Rinse from the top down, in sections, with plenty of water.
- Rinse the plants again, and rinse windows and the ground near the work.
- Walk the whole house in good light, looking for streaks and missed spots. Fix them.
- Take after photos from the same angles. Clean up and coil hoses. Walk the customer through.
- Done looks like: Even color, no streaks, no dead plants, no chemical residue on glass or metal.
- Stop and call if: You see rot or loose siding, a customer's plants look damaged, or the surface is delicate (old paint, stucco, soft siding).
For mix ratios, see our soft wash mix calculator.
2. Deck prep before staining
- Why it matters: Stain fails because of prep far more than because of product.
- Steps:
- Photograph the deck, including damage, rot and old finish.
- Check boards, fasteners and rails. Note repairs for the office. Do not repair beyond the work order.
- Cover plants, siding, windows and anything else you will not coat.
- Clean the surface with the method and product on the work order.
- Brighten or neutralize if the stain system calls for it.
- Let the wood dry for the time in the stain maker's data sheet. Do not guess.
- Check moisture if the data sheet requires it.
- Sand or strip rough or failed areas.
- Do a test spot where the customer cannot see it.
- Apply the stain per the data sheet: coats, wet-on-wet, wiping, dry time.
- Done looks like: Even color, no lap marks, no drips, no pooled stain, clean edges against siding and posts.
- Stop and call if: The wood is wet or soft, the weather will not hold, or the old finish does not match the system you quoted.
3. Standard house clean
- Why it matters: Cleaners who work in a different order every time miss things, and customers notice.
- Steps:
- Walk through and look for anything fragile, anything to leave alone, and any damage. Photograph existing damage.
- Work top to bottom in each room (ceiling fans and shelves before floors).
- Work dry to wet (dust and vacuum before you mop).
- Work in the same room order every time, so you do not forget one.
- Kitchen: counters, appliance fronts, sink, stovetop, microwave, floor.
- Baths: sink, counter, mirror, toilet, tub and shower, floor.
- Bedrooms and living areas: dust, make beds if on the list, vacuum, mop.
- Check each room from the doorway for what you missed.
- Take after photos, lock up, set the alarm if you are asked to.
- Text the office that you are done.
- Done looks like: Clean from the doorway and up close, nothing moved or broken, and everything back where it was.
- Stop and call if: Something breaks, something looks unsafe, there is pet or biohazard mess, or you are locked out.
4. Mow and edge
- Why it matters: A route lives or dies on a clean, repeatable pattern and a quick finish.
- Steps:
- Check the gate and walk the lawn for toys, hoses, stones, dog mess and sprinkler heads.
- Set the mower deck height for the grass type and the season.
- Mow in the pattern on the route sheet. Change the direction each visit.
- Trim around fences, trees, beds and posts. Keep the trimmer away from tree bark.
- Edge along walks and driveways.
- Blow clippings off hard surfaces, and not into the neighbor's yard or onto cars.
- Close the gate. Put back what you moved.
- Take one after photo from the street.
- Note anything for the office: a broken head, a dead patch, a stone you found.
- Done looks like: Even height, clean lines, nothing on the driveway, gates closed.
- Stop and call if: You hit a sprinkler head, a stone breaks something, or someone is in the yard.
5. End-of-day closeout (any trade)
- Why it matters: Most problems that reach the customer start at the end of the day.
- Steps:
- Walk the whole job with the lead, looking for missed items, mess and damage.
- Take the after photos.
- Clean up: sweep, rinse, pick up trash, fold tarps.
- Count the tools. Put them in the truck.
- Leave a note or text for the customer: what was done, what is next.
- Clock out.
- Lead sends the handoff text to the office. See making someone a crew lead.
- Done looks like: The site looks better than when you arrived.
Photos and short videos
A photo does the work of a paragraph. For each SOP:
- One "done looks like" photo at the top.
- Photos of the tricky steps, such as masking around a window or an edging line.
- A 20 to 40 second phone video for steps that are hard to describe, like how to set up a sprayer.
- Photos from your real jobs, not the internet.
Keep videos short and name them like the SOP. Store the SOPs where the crew can open them from a phone.
Getting the crew to use them
Writing an SOP is half the work. Getting it used is the other half.
- Write with the crew. Ask your best person how they do it. They know things you forgot. People follow what they helped write.
- Train with them. Use the SOP in the new-hire plan. See training a new crew member.
- Put the short version on the job. A checklist on their phone beats a folder in the truck.
- Use it when something goes wrong. "Which step did we skip?" is better than "who messed up?"
- Update it after a mistake. If it did not prevent the problem, the SOP is wrong.
- Don't write what you do not enforce. An SOP nobody follows teaches the crew that the rules are suggestions.
Review them each winter
Each winter, spend an afternoon:
- Read each SOP with the lead.
- Fix any step that changed (new equipment, new product, new rule).
- Add the three things that went wrong last season.
- Retire the ones nobody uses.
- Update the photos.
- Update the date.
Free template
Copy this into a doc or note and fill it in.
SOP: ______________________________ Updated: ________
Owner: _____________
Why it matters:
________________________________________________
When and who:
________________________________________________
Tools and materials:
________________________________________________
Steps:
1. _____________________________________________
2. _____________________________________________
3. _____________________________________________
4. _____________________________________________
5. _____________________________________________
6. _____________________________________________
7. _____________________________________________
8. _____________________________________________
Done looks like (photo here):
________________________________________________
Photos to take:
[ ] Before [ ] During [ ] After
Stop and call if:
- ______________________________________________
- ______________________________________________
How Chalk helps
This part is about our software. Skip it if you only want the SOP advice.
- Checklists under Settings > Lists > Checklists. Press New checklist, add items (each a Checkbox, a Note or a Photo) and mark the ones that matter Required. Then choose where it goes under Added to visits: Default for jobs, Default for quote appointments or Manual only. You can also attach a checklist to a job type under Settings > Lists > Job types.
- Required items gate "Mark it done". On the crew's finish sheet, Mark it done stays grey until every required item is complete. That check happens only on the crew's finish sheet. If the office presses Mark job complete, or ChalkBot or the API finish a visit, the required items are not checked. See Run a job from approval to invoice.
- Notes for the crew. The job's Notes card holds your notes for the crew (gate codes, the dog, where to park), and the crew sees them on Today. See Crew's My Day.
Chalk's checklists are short ticks, notes and photo prompts. It does not hold a full SOP with steps and pictures, so keep those in a shared folder and use the checklist as the short version on the job.
For a new hire's first week, start from the crew onboarding checklist.
Sources
- OSHA, Hazard Communication, for the duty to keep labels and safety data sheets and to train workers who use hazardous chemicals. Write every chemical step against the label and SDS.
- The SOP steps here are examples written for teaching, not instructions for any product. Follow the label, the safety data sheet and the maker's data sheet.